[IMP] Quality: Measure check Shop Floor

closes odoo/documentation#7572

X-original-commit: 5b47c396ca
Signed-off-by: John Holton (hojo) <hojo@odoo.com>
This commit is contained in:
John Holton (hojo) 2023-12-13 13:56:20 -08:00
parent ee71f1eb9a
commit 4299eed3cd
4 changed files with 44 additions and 27 deletions

View File

@ -2,6 +2,7 @@
Measure quality check
=====================
.. |MO| replace:: :abbr:`MO (Manufacturing Order)`
.. |QCP| replace:: :abbr:`QCP (Quality Control Point)`
.. |QCPs| replace:: :abbr:`QCPs (Quality Control Points)`
@ -137,8 +138,9 @@ If a quality alert must be created, click the :guilabel:`Quality Alert` button t
top of the manufacturing or inventory order after the check fails. Clicking :guilabel:`Quality
Alert` opens a quality alert form on a new page.
For a complete guide on how to fill out the quality alert form, view the documentation on
:ref:`quality alerts <quality/quality_management/quality-alerts>`.
.. seealso::
For a complete guide on how to fill out the quality alert form, view the documentation on
:doc:`quality alerts <../quality_management/quality_alerts>`.
On a work order
---------------
@ -148,47 +150,62 @@ specified in the :guilabel:`Work Order Operation` field on the |QCP| form. If a
specified, a *Measure* quality check is created for that specific work order, rather than the
manufacturing order as a whole.
*Measure* quality checks created for work orders must be processed from the tablet view. To do so,
begin by navigating to :menuselection:`Manufacturing --> Operations --> Manufacturing Orders`.
Select a manufacturing order that includes a work order for which a quality check is required. Open
the tablet view for that work order by selecting the :guilabel:`Work Orders` tab, and then clicking
the :guilabel:`📱 (tablet)` button on the order's line.
*Measure* quality checks configured for work orders **must** be completed from the *Shop Floor*
module. To do so, begin by navigating to :menuselection:`Manufacturing --> Operations -->
Manufacturing Orders`. Select an |MO| that includes a work order for which a *Measure* quality check
is required.
With tablet view open, complete the steps listed on the left side of the screen until the *Measure*
quality check step is reached. Upon reaching the check, the instructions for how to take the
measurement appear at the top of the screen. Enter the measured value in the :guilabel:`Measure`
field above the instructions, and then click :guilabel:`Validate`.
On the |MO|, select the :guilabel:`Work Orders` tab, and click the :guilabel:`Open Work Order
(external link icon)` button on the line of the work order to be processed. On the resulting
:guilabel:`Work Orders` pop-up window, click the :guilabel:`Open Shop Floor` button to open the
*Shop Floor* module.
.. image:: measure_check/measure-tablet-view.png
When accessed from a specific work order, the *Shop Floor* module opens to the page for the work
center where the order is configured to be processed, and isolates the work order's card, so no
other cards are shown.
Process the work order's steps until the *Measure* quality check step is reached. Click on the step
to open a pop-up window that includes instructions for how the measurement should be taken. After
taking the measurement, enter it in the :guilabel:`Measure` field of the pop-up window, and then
click :guilabel:`Validate`.
.. image:: measure_check/measure-check-shop-floor.png
:align: center
:alt: A Measure quality check in the Manufacturing tablet view.
:alt: A Measure check in the Shop Floor module.
If the measurement entered is within the range specified in the :guilabel:`Tolerance` section of the
|QCP|, the quality check passes and the tablet view moves on to the next step of the work order.
However, if the measurement entered is outside of the specified range, a pop-up window appears,
|QCP|, the quality check passes, and the pop-up window moves on to the next step of the work order.
However, if the measurement entered is outside of the specified range, a new pop-up window appears,
titled :guilabel:`Quality Check Failed`.
The body of the :guilabel:`Quality Check Failed` pop-up window shows a warning message that states,
:guilabel:`You measured # units and it should be between # units and # units.`, as well as the
The body of the :guilabel:`Quality Check Failed` pop-up window shows a message that states,
:guilabel:`You measured # units and it should be between # units and # units`, as well as the
instructions entered in the :guilabel:`Message If Failure` tab of the |QCP|. At the bottom of the
pop-up, two buttons appear: :guilabel:`Correct Measure` and :guilabel:`Confirm Measure`.
pop-up window, two buttons appear: :guilabel:`Correct Measure` and :guilabel:`Confirm Measure`.
.. image:: measure_check/measure-check-failed.png
.. image:: measure_check/shop-floor-measure-check-failed.png
:align: center
:alt: The "Quality Check Failed" pop-up window.
:alt: The Quality Check Failed pop-up window for a Measure check in the Shop Floor module.
If the measurement was not entered correctly, and should be changed, select :guilabel:`Correct
Measure`. Doing so opens a new pop-up window, titled :guilabel:`Quality Check`. Enter the corrected
measurement in the :guilabel:`Measure` field, then click :guilabel:`Validate` to complete the check,
and move on to the next step of the work order.
measure in the :guilabel:`Measure` field, and then click :guilabel:`Validate` to complete the check
and close the pop-up window.
If the measurement was entered correctly, click :guilabel:`Confirm Measure` instead, and the quality
check fails. Follow any instructions that were listed on the :guilabel:`Quality Check Failed` pop-up
window.
If a quality alert must be created, do so by clicking the :guilabel:`☰ (three horizontal lines)`
button, and selecting :guilabel:`Quality Alert` from the :guilabel:`Menu` pop-up window. A
:guilabel:`Quality Alerts` pop-up window appears, from which a quality alert can be created.
If a quality alert must be created, exit the pop-up window by clicking the :guilabel:`X (close)`
button in the top-right corner.
For a complete guide on how to fill out the quality alert form, view the documentation on
:ref:`quality alerts <quality/quality_management/quality-alerts>`.
Then, click the :guilabel:`⋮ (three vertical dots)` button on the bottom-right corner of the work
order card to open the :guilabel:`What do you want to do?` pop-up window.
On the :guilabel:`What do you want to do?` pop-up window, select the :guilabel:`Create a Quality
Alert` button. Doing so opens a blank quality alert form in a new :guilabel:`Quality Alerts` pop-up
window.
.. seealso::
For a complete guide on how to fill out quality alert forms, view the documentation on
:doc:`quality alerts <../quality_management/quality_alerts>`.

Binary file not shown.

After

Width:  |  Height:  |  Size: 29 KiB