[ADD] iot: new doc about connecting a measurement tool

iot.rst

@@ -7,7 +7,5 @@ Internet of Things (IoT)
 .. toctree::
    :titlesonly:
 
-   iot/connect
+   iot/config
-   iot/pos
+   iot/devices
-   iot/iot_notfound
-   iot/flash_sdcard

iot/config.rst

@@ -0,0 +1,12 @@
+=============
+Configuration
+=============
+
+.. toctree::
+   :titlesonly:
+   :glob:
+
+   config/connect
+   config/flash_sdcard
+   config/iot_notfound
+   config/pos

iot/devices.rst

@@ -0,0 +1,9 @@
+=============
+Configuration
+=============
+
+.. toctree::
+   :titlesonly:
+   :glob:
+
+   devices/measurement_tool

iot/devices/measurement_tool.rst

@@ -0,0 +1,61 @@
+==========================
+Connect a measurement tool
+==========================
+
+With Odoo’s *IoT Box*, it is possible to connect measurement tools to
+your database. Find the list of supported devices here: `Supported
+devices
+<`*https://www.odoo.com/page/iot-hardware* <https://www.odoo.com/page/iot-hardware>`__>`__,.
+
+Connect in USB
+==============
+
+To add a device connected by USB, just plug the USB cable in the *IoT
+Box*, restart the Box and the device should appear in your Odoo
+database.
+
+.. image:: media/measurement_tool_01.png
+   :align: center
+
+If the device is not found, make sure the drivers have well been loaded
+on your IoT Box. For this, connect to the *IoT Box Homepage* and click
+on load drivers.
+
+.. image:: media/measurement_tool_02.png
+   :align: center
+
+Connect in Bluetooth
+====================
+
+Activate the Bluetooth on your device (see your device manual for
+further explanation) and the IoT Box will automatically try to connect
+to the device.
+
+Here is an example of what it should look like:
+
+.. image:: media/measurement_tool_03.png
+   :align: center
+
+Link a measurement tool to a quality control point
+==================================================
+
+With the Manufacturing app
+--------------------------
+
+In your *Quality app*, you can setup a device on your *Quality
+Control Points*. To do so, go to the *Control Points* menu, under
+*Quality Control* and open the control point to which you want to
+assign a measurement tool.
+
+Now, you can edit the control point and choose the device from the
+dropdown list. Then, hit save.
+
+.. image:: media/measurement_tool_04.png
+   :align: center
+
+Now, your measurement tool is linked to the chosen *Control Point*.
+The value, which needs to be changed manually, will be automatically
+updated while the tool is being used.
+
+.. image:: media/measurement_tool_05.png
+   :align: center

point_of_sale/overview/start.rst

@@ -131,4 +131,4 @@ It's done, you have now closed your first PoS session.
 
 .. tip::
    To connect the PoS to hardware with an Odoo IoT Box, please see the section
-   :doc:`../../../iot/connect` and :doc:`../../../iot/pos`
+   :doc:`../../../iot/config/connect` and :doc:`../../../iot/config/pos`