[MERGE] Forward-port of branch 12.0 to 13.0

iot/config/connect.rst

@@ -25,10 +25,16 @@ Ethernet Connection
 
 2. Power on the IoT Box.
 
-3. Then click on the Scan button.
+3. Read the Pairing Code from a screen or a receipt printer connected to the IoT Box.
 
-.. image:: media/connect04.png
+   .. image:: media/connect04.png
-   :align: center
+
+4. Input the Pairing Code and click on the Pair button.
+
+.. note::
+   Recent changes in modern web browsers forced us to modify the connection wizard.
+   If your screen is different from the screenshots, make sure that the
+   ``iot_pairing`` module is installed.
 
 WiFi Connection
 ~~~~~~~~~~~~~~~
@@ -37,23 +43,20 @@ WiFi Connection
 
 2. Copy the token
 
-.. image:: media/connect05.png
+   .. image:: media/connect05.png
-   :align: center
 
-1. Connect to the IoT Box WiFi Network (make sure there is no ethernet
+3. Connect to the IoT Box WiFi Network (make sure there is no ethernet
    cable plugged in your computer).
 
-.. image:: media/connect06.png
+   .. image:: media/connect06.png
-   :align: center
 
 4. You will be redirected to the IoT Box Homepage (if it doesn't work,
    connect to the IP address of the box). Give a name to your IoT Box (not
    required) and paste the token, then click on next.
 
-.. image:: media/connect07.png
+   .. image:: media/connect07.png
-   :align: center
 
-.. tip::
+   .. tip::
       If you are on Runbot, do not forget to add the -all or -base in the
       token (e.g. this token
       **http://375228-saas-11-5-iot-f3f920.runbot16.odoo.com\|4957098401**
@@ -64,8 +67,7 @@ WiFi Connection
    if there is one) and click on Submit. Wait a few seconds before being
    redirected to your database.
 
-.. image:: media/connect08.png
+   .. image:: media/connect08.png
-   :align: center
 
 You should now see the IoT Box.