55 lines
1.7 KiB
ReStructuredText
55 lines
1.7 KiB
ReStructuredText
================
|
||
Connect a Camera
|
||
================
|
||
|
||
When using your *IoT Box* in Odoo, you could need to use a camera. As
|
||
it can be done in a few steps, this device is really easy to configure.
|
||
Then, you can use it in your manufacturing process and link it to a
|
||
control point. Doing so will allow you to take pictures when you reach
|
||
the chosen quality control point.
|
||
|
||
Connection
|
||
==========
|
||
|
||
To connect the camera to the *IoT Box*, simply combine the two by
|
||
cable.
|
||
|
||
.. note::
|
||
In some cases, a serial to USB adapter could be needed.
|
||
|
||
If your camera is a `*supported
|
||
one* <https://www.odoo.com/page/iot-hardware>`__, there is no need to
|
||
set up anything as it will be detected as soon as it is connected.
|
||
|
||
.. image:: media/camera_01.png
|
||
:align: center
|
||
|
||
In some cases, you could need to restart the box and download your
|
||
camera’s drivers from the box. To do so, go to your *IoT Box Home
|
||
Page* and click on *drivers list*. Then, click on load drivers.
|
||
|
||
.. image:: media/camera_02.png
|
||
:align: center
|
||
|
||
Link a Camera to a Quality Control Point
|
||
========================================
|
||
|
||
With the Manufacturing app
|
||
--------------------------
|
||
|
||
In your *Quality app*, you can setup the device on a *Quality Control
|
||
Point*. Go to the *Control Points* menu, under *Quality Control*
|
||
and open the control point you want to link with the camera.
|
||
|
||
Now, you can edit the control point and select the device from the
|
||
dropdown list. Now, hit save.
|
||
|
||
.. image:: media/camera_03.png
|
||
:align: center
|
||
|
||
Then, your camera can be used with the picked *Control Point*. During
|
||
the manufacturing process, reaching the *Quality Control Point* you
|
||
chose before will allow you to take a picture.
|
||
|
||
.. image:: media/camera_04.png
|
||
:align: center |