e709090a62
Some of the explanations were wrong/outdated. We also add a troubleshooting guide with most common problems.
45 lines
1.4 KiB
ReStructuredText
45 lines
1.4 KiB
ReStructuredText
================
|
|
Connect a Camera
|
|
================
|
|
|
|
When using your *IoT Box* in Odoo, you could need to use a camera. As
|
|
it can be done in a few steps, this device is really easy to configure.
|
|
Then, you can use it in your manufacturing process and link it to a
|
|
control point. Doing so will allow you to take pictures when you reach
|
|
the chosen quality control point.
|
|
|
|
Connection
|
|
==========
|
|
|
|
To connect the camera to the *IoT Box*, simply connect the two by
|
|
cable.
|
|
|
|
If your camera is a `*supported
|
|
one* <https://www.odoo.com/page/iot-hardware>`__, there is no need to
|
|
set up anything as it will be detected as soon as it is connected.
|
|
|
|
.. image:: media/camera_01.png
|
|
:align: center
|
|
|
|
Link a Camera to a Quality Control Point
|
|
========================================
|
|
|
|
With the Manufacturing app
|
|
--------------------------
|
|
|
|
In your *Quality app*, you can setup the device on a *Quality Control
|
|
Point*. Go to the *Control Points* menu, under *Quality Control*
|
|
and open the control point you want to link with the camera.
|
|
|
|
Now, you can edit the control point and select the device from the
|
|
dropdown list. Now, hit save.
|
|
|
|
.. image:: media/camera_03.png
|
|
:align: center
|
|
|
|
Then, your camera can be used with the picked *Control Point*. During
|
|
the manufacturing process, reaching the *Quality Control Point* you
|
|
chose before will allow you to take a picture.
|
|
|
|
.. image:: media/camera_04.png
|
|
:align: center |