17df8c547a
Since odoo/documentation#903, the guideline for the location of new resource (images, downloadable files, RST includes...) files is to place those inside the directory of the RST page that references them. For example, if `doc1.rst` has a reference to `image.png` and to `download.zip`, the file structure should look like this: ├── parent_doc/ │ └── doc1/ │ │ └── image.png │ │ └── download.zip │ └── doc1.rst │ └── doc2.rst ├── parent_doc.rst Before this commit, most of the resource files were still located inside 'media' directories holding all the resource files referenced by RST pages located at the same level as these directories. In the example above, a single 'media' directory would hold all the resource files referenced by both `doc1.rst` and `doc2.rst`. Doing so prevented us from figuring out easily which resource file was referenced by which RST page and, thus, lead to unused resource files piling up in the repository. It also made it more complicated to define codeowners regex rules because a team could not simply be assigned to `/some_page.*` but needed to be assigned to both `/some_page\.rst` and to the location of 'media'. In order to help new content writers figure out the guideline when taking examples from other RST pages, this commit retroactively applies the guideline to existing resource files and 'media' directories. The left-over resource files that are not referenced by any RST page are removed. task-2497965 Part-of: odoo/documentation#2064
45 lines
1.4 KiB
ReStructuredText
45 lines
1.4 KiB
ReStructuredText
================
|
|
Connect a Camera
|
|
================
|
|
|
|
When using your *IoT Box* in Odoo, you could need to use a camera. As
|
|
it can be done in a few steps, this device is really easy to configure.
|
|
Then, you can use it in your manufacturing process and link it to a
|
|
control point. Doing so will allow you to take pictures when you reach
|
|
the chosen quality control point.
|
|
|
|
Connection
|
|
==========
|
|
|
|
To connect the camera to the *IoT Box*, simply connect the two by
|
|
cable.
|
|
|
|
If your camera is a `*supported
|
|
one* <https://www.odoo.com/page/iot-hardware>`__, there is no need to
|
|
set up anything as it will be detected as soon as it is connected.
|
|
|
|
.. image:: camera/camera_01.png
|
|
:align: center
|
|
|
|
Link a Camera to a Quality Control Point
|
|
========================================
|
|
|
|
With the Manufacturing app
|
|
--------------------------
|
|
|
|
In your *Quality app*, you can setup the device on a *Quality Control
|
|
Point*. Go to the *Control Points* menu, under *Quality Control*
|
|
and open the control point you want to link with the camera.
|
|
|
|
Now, you can edit the control point and select the device from the
|
|
dropdown list. Now, hit save.
|
|
|
|
.. image:: camera/camera_03.png
|
|
:align: center
|
|
|
|
Then, your camera can be used with the picked *Control Point*. During
|
|
the manufacturing process, reaching the *Quality Control Point* you
|
|
chose before will allow you to take a picture.
|
|
|
|
.. image:: camera/camera_04.png
|
|
:align: center |