af016f4239 did a half-assed job and
didn't fix the one test which actually checks the dashboard.
TBF I was in a bit of a hurry trying to make the mergebot work and be
presentable again, but still...
15.0 (or 14.0) dropped some of the BS3 (?) compatibility stuff, which
the mergebot was (apparently) relying on. This lead to a visual
degradation as well as the frontend dropdown looking absolutely awful.
Fix that, on both style and templates.
15.0 (or 14.0) also dropped the bespoke responsive utility classes,
switch to bootstrap's.
Turns out I was running "15.0" except just on the runbot, enterprise
and community were still the 14.0 repos, so some of the changes were
missing.
While at it, bundle fixes for 3.10, as that's what Jammy needs, and
the mergebot/15.0 will be running on that.
- Some batches in a few stagings are apparently empty (e.g. batch
71771 from staging 32511), the listing was not resilient to such
issues.
Update the code to suppress the display of empty batches.
- The possibility of accessing `/runbot_merge/<id>` with a
non-existent branch had not been considered and triggered a
rendering error in the template.
Fixes#630, fixes#631
Currently deactivating a branch kinda leaves users in the dark, with
little way to know what has happened aside from inferring it from the
branch having disappeared from the main dashboard.
- surface the state of the branch in the PR dashboard (also surface
the target branch at all so users can see if their PR is targeted
as they expect as far as the mergebot is concerned)
- close & notify every PR to a branch being deactivated
- cancel any current staging to the branch (as a consequence of the
above)
Closes#632
It's likely that the PR pages are seen more commonly than the
dashboard by most users, so add alerts there in case users wonder
what's happening.
Fixes#580
Before this, until the first status for a required context the status
would appear as pending, but would be have oddly (e.g. not clickable).
Update the style of such statuses for clarity:
- use a light background to show them as inactive
- use the `wait` cursor to show their status as oddball (and not clickable)
Setting this styling on the link (or even `li`) doesn't seem to work,
so set it on the `ul`, the actual active links will set the relevant
"active" cursor instead, which seems to work fine.
While at it, extract the status menu to its own template and unify the
disparate bits, mainly in that both the main dashboard and the
per-branch list display the staging instant in UTC on hover: before,
the main dashboard would display a relative delta and provide the
UTC-formatted instant on hover, but the branch would only show a zoned
ISO-8601 instant.
While adjusting is easy, it's unnecessary, we can easily provide the UTC
staging instant there).
Extract the creation of a PR link (to github) as a dedicated
template for easier updates, and to use `display_name`
everywhere (instead of reimplementing it by name).
Also implement support for repo-level groups setting for information
hiding.
Fixes#590
When a staging's fast-forward (to the target branch) fails, the
mergebot would provide no useful information on the staging or the
dashboard.
This is because the reason was set to the HTTP status, which in case
of a fast-forward error is just "422 client error: unprocessable
entity".
Improve this by trying to parse github's response in that case, and
using the JSON error message as failure reason. This provides more
useful failure information like "update is not a fast forward",
"reference does not exist", or a branch protection failure.
Closes#591
- code in the various menus added over time through the UI (queues,
configuration, ...)
- update / improve PR layout a tick
- fix "outstanding forward ports" count on the dashboard
- improve hover title / help on dashboard
- add date of last modification (usually date of success / failure)
- make casing more coherent (everything lowercase)
- add explicit note that UTC date on staged at label is staged at datetime
- rediscover yet again that the staging information is when hovering
on the staging *except the staged at label*
- improve `PullRequest.unstage` to always insert the PR at the start of the
reason when cancelling the staging, for clarity / traceability
Closes#560, closes#609
* Adds a changelog page, linked from the main, with content
automatically loaded from the source. To avoid conflicts, each entry
is its own file and entries are grouped by the month during which
the update will (probably) be deployed
* The last group (most likely "last update") doesn't have a title, the
rest do.
* Add changelog entries from the last update so it's not too empty.
* Also update the layout for the alerts a bit: remove bottom margin to
reduce loss of whitespace.
The list of outstanding forwardports was pretty messy as the ordering
was unclear and there was little way to really drill into the thing.
* Shows outstanding forward ports sorted by merged date ascending, the
oldest-merged PRs are the ones most in need of fixing while PRs
which were only just merged can safely be ignored.
* List reviewers with outstanding forward-ports, allow filtering by
clicking on their name, allow deseleting through the subtitle of the
page.
* Don't display reviewer in list when page is already filtered by
reviewer.
Also improve PR page a bit:
* Add reviewer.
* Add direct link to backend (closes#524).
Closes#529
The page of PRs in "error" is currently kinda broken: it does not show
any feedback aside from the PR being in error which is not very
useful.
The intent was always to show an explanation, but when adding the page
I just deref'd `staging_id` which always fails though in two different
ways:
* when the PR can not be staged at all (because of a conflict) there
is no staging at all with a reason to show, so there should be
a fallback that the PR could not even be staged
* `staging_id` is a related field which deref's to the staging_ids
of the first *active* batch, except when a staging completes
(successfully or not) both staging and batch are disabled.
Plus the first batch will be the one for the first staging so if the
PR is retried and fails again the wrong reason may be displayed.
So update the section to show what we want: the reason of the
staging of the *last* batch attached to the PR.
NOTE: there's one failure mode remaining, namely if a staging fails
then on retry the PR conflicts with the new state of the
repository (so it can't be staged at all), the "reason" will
remain that of the staging. This could be mitigated by attaching
a "nonsense" batch on failure to stage (similar to the
forwardport stuff), that batch would have no staging, therefore
no staging reason, therefore fallback.
Closes#525
Previously, a PR's status page would only show the linked / related
PRs when `open`.
Since the relations between PRs remains useful, also make this
information available during staging and after merging.
Fixes#463
* in the main dashboard, show the exact UTC timestamp (with a Z
marker) on hover, not just the relative delta
* in the branch details page, show the full timestamp, zoned, in
ISO-8601 format
Because github materialises every labels change in the
timeline (interspersed with comments), the increasing labels churn
contributes to PRs being difficult to read and review.
This change removes the update of labels on PRs, instead the mergebot
will automatically send a comment to created PRs serving as a
notification that the PR was noticed & providing a link to the
mergebot's dashboard for that PR where users should be able to see the
PR state in detail in case they wonder what's what.
Lots of tests had to be edited to:
- remove any check on the labels of the PR
- add checks on the PR dashboard (to ensure that they're at least on
the correct "view")
- add a helper to handle the comment now added to every PR by the 'bot
- since that helper is needed by both mergebot and forwardbot, the
utils modules were unified and moved out of the odoo modules
Probably relevant note: no test was added for the dashboard
ACL, though since I had to explicitly unset the group on the repo used
for tests for things to work it looks to me like it at least excludes
people just fine.
Fixes#419
Mistake in the statuses handling: the context is not sufficient to
uniquely identify a staging status as different repositories can get
the same status context (e.g. ci/runbot is present on all our
repositories).
This is only a visual problem, but the status dropdown on
stagings (both the dashboard and the branchwise listing) would reuse
one of the status with the context for all of them, leading to
incorrect links and misleading displays.
Fix by keying on (repo, context) instead, that's exactly why the
repository name was part of the status in the first place.
Apparently a long-running issue but not really a concern before the
new mergebot started sending a lot more statuses: stagings would show
a list of all statuses they received, including optional / irrelevant
statuses.
Get a list of required statuses and only show that on the staging
dropdowns.
Closes#387
Currently the PR becomes successful-green as soon as CI fully passes
but before it's merged, which can be an issue as e.g. merging might be
delayed (there's no visible difference between "CI success" and
"staging merged") or it might ultimately failed (FF error).
Create an intermediate color for "successful" stagings which are still
pending merge.
Also add a fallback message for fast-forward errors instead of en
empty string.
Closes#308
During freezes it can be useful to notify viewers that nothing is
going to forward port or merge for a while, and that this is
intentional (not something that's broken).
Fixes#307
Refactor the selection thingie, hopefully in a way which doesn't
absolutely crater performances, so that it's possible to explain the
reason why a PR is considered blocked.
Pages take over from redirections which really is a pain in the ass
when trying to find out why the bloody redirection seemingly refuses
to work.
Note: can't use the record tag because homepage_page is marked as
noupdate, so we have to bypass the flag checking.
bs4 yields complete vomit on the template as-is (see:
https://imgur.com/a/XIMn7MX).
Add a bunch of color and styling overrides to get something closer to
the original, and move the existing styles to a "proper" scss file
while at it.
* only show 2 stagings on cellphones as 4 is way too much, moving to a
vertical layout would probably be a bad idea as stagings can already
be very tall and then we have multiple branches stacked on one
another, unless we also make branches foldable
the more complete list of stagings (per branch) is available on the
branch's page anyway so providing a not-completely-broken home looks
more useful, and at a fundamental level the current / last staging
is really the one we care about
* remove the size bounds on stagings to avoid smushing all the cells
together and overlapping text, sadly can't overflow scroll the
stagings element because you can't have an overflow-x: scroll and an
overflow-y: visible (that becomes auto)
* split out truly awaiting PRs from those waiting on an event of some
sort
* if a staging is active but doesn't have a state yet, it should be
considered pending not cancelled
closes#74
Currently, if a staging is ongoing or failed one has to hunt for the
staging branches on the runbot dashboard in order to find out what
happens.
This adds a dropdown to the staging box/block providing direct status
and access to all the CI information whether the CI is ongoing or done,
successful or not.
* [ADD] runbot_merge: more informative states to stagings on error
Currently, when a staging fails for other reasons than a CI failure:
* the staging having been cancelled is known implicitly, because the
staging will be deactivated but will never get a status beyond
pending (because it's not found when looking for it since it's not
`active`)
* the fast-forward having failed is completely silent (logging aside),
it looks for all the world like the staging succeeded
Timeout fails the PR already, but split-on-timeout was not so fix that
one bit.
* [FIX] odoo/odoo#cb2862ad2a60ff4ce66c14e7af2548fdf6fc5961
Closes#41
