When a build is garbage collected and the local folders are cleaned, the
log files are kept to allow build errors investigations.
With this commit, a full local cleanup will be done 365 days after the
garbage collect. This means that the build dir will be completely
removed. The default number of days can be tweaked with the
`runbot.full_gc_days` ir.config_parameter.
Also, the _local_cleanup method can be called with a `full` boolean
parameter to force a full cleanup. e.g.: when called in a config step.
While at it, the res_config_settings view is a bit reorganized.
Currently limited to release/freeze PRs: it can be difficult to be
sure the right PR was selected then, and a mistake there seems more
impactful than in the PRs being waited for?
Note: adds a test to make sure I don't break the check that all
release PRs must have the same label (be linked). This was
already safe, and in a way this PR adds convenience but not
really safety, but better sure than sorry.
The freeze wizard has support for merging freeze / release PRs on each
of the newly created branches. But since this would be done by, well,
merging, those PRs would get forward-ported to master, and would have
to be closed there.
This creates additional work for the freeze master, and noise /
parasitic PRs.
Obviously it's possible for the freeze master to set some nonsense `up
to` (nonsense because the "real" limit doesn't exist yet at that
point), but really it never makes any sense to forward port release
PRs, so the wizard should do it.
- add flag to not select repos for freezing
- allow removing more repositories from the wizard
- when performing the freeze, only create branches for the selected
repos
The freeze wizard was implemented using a single action to open and
validate the dialog.
This was a mistake, as it means if there are no errors left (e.g. all
the PRs being waited for are now validated) trying to view the freeze
wizard will immediately validate it and commit the freeze, which is
unexpected, surprising, and unsafe e.g.
- open wizard
- add freeze prs
- add a required pr or two
- close and go do something else
- be told that more PRs need to be waited for
- reopen wizard
- oops freeze is done
So split the "open action" part of `action_freeze` into opening the
action and performing the freeze. The "freeze" / "view freeze" button
on the project only activates the latter, and the actual freeze
operation is only triggered from the wizard's "Freeze" button.
Part of #559.
When a git archive fails, the partially exported source tree is left in
place. If another builds tries to use the same commit, the tree is not
exported anymore as the directory exists. This leads to non
deterministic behaviors.
Right now single version repo like upgrade are managed using
a regex to limit name prefix, this avoid grouping branches when
mergebot wont be able to merge them together but the ci can be painfull
since the branch needs to be renamed (closing existing pr) or a manual
operation to move the branch into a new bundle must be performed.
This commit proposes to replace the forbidden_regex mechanism with
an explicit single_version mechanism.
In this case the reference name will be automatically prefixes with
the version. The prefix contains `---` to indicate that some
magic was applied.
Runbot layout modifies the website/portal base layout to remove navbar,
footer, overides some custom styles. A lot of assets are loaded but not
used. The only real usefull elements are base assets (bootstrap, ...)
and the login button.
Migrating to the next version of odoo is usually painfull because some
xpath may break, extra element added, or some style change may break the
page, needing to add more and more xpath, css rules, ... for very little
benefits.
This cleanup creates a custom base layout for runbot independant from
base odoo templates.
Also add a breadcrumb, navigation arrow, and improve batch links
- searching on number will search for both pr and branche name
- hooks are now using payload to define repo when not given in url
- fixes .git cleaning in repo
(remove rstrip since it can fail for repo starting with g, i, t)
- recompute base on prepare if base was not found
- remove local_result form write values if there is a single record
(instead of raising, makes python step easier to write).
- avoid stucked build/loop after removing a step from a config.
- avoid to send ci for linked base_commit
- add a fallback mechanism for base if no master branch is found
- add option on project to avoid to keep sticky running, usefull
when using a lots of projects
WARNING: this is a change of default behaviour, need to update
existing projects.
- always discover new commits for branch matching base paterns.
This is especially usefull to discover old versions on project with
low merge frequency.
- always create a batch, event if there is now trigger. This helps to
notice that commits are discovered
- add line-through on death branches/pr
- manual trigger are now displayed on main page
As for the builder, this give the ability to run the discovery of new
commits and all related logic in a separate process.
This will mainly be usefull to restart frontend without waiting for cron
or restart "leader" without stoping the frontend. This will also be
usefull for optimisation purpose.
As a custom codeowner system was successfully implemented in a python
step on our runbot instance, it's now time to have a real model for
that.
This commit adds a skeleton Codeowner model in order to be used for a
basic usage.
This should be improved in the future after some battle testing.
With the increasing usage of runbot to test various things and to take
care of random bugs in tests, the need of a team dashboard arose.
This commit adds a `runbot.team` model. Internal users can be
linked to the team. Module wildcards can be used to automatically assign
build errors to a team at 'build.error` creation.
Also, an upgrade exception can be assigned to a team in order to display
it on a dashboard.
A dashboard model is used to create custom dashboards on the team
frontend page. By default, a dashboard is meant to display a list of
failed builds. The failed builds are selected by specifying a project, a
trigger category (e.g. nightly), a config and a domain (which select
failed builds by default).
The dashboard can be customized by specifying a custom view.
Each created team has a frontend page that displays all the team
dashboards and the errors assigned to the team.
A few other improvement also come with this commit:
* The cleaned error is now in a tab on the build error form
* Known errors are displayed as "known" on the build log page
* The build form shows the config used for the build
Apparently 2.34:
* flipped around the "auto-merging" and "CONFLICT" messages on stdout,
so just match the second one with wildcards around to ignore the
location of the first
* changed the casing and content of everything after the `error` line
on stderr, so just ignore it all (none of it's actually useful
anyway)
Provides a less manual interface for creating the freeze:
* takes the name of the branch to create
* takes any number of PRs which must be part of the freeze
* takes PRs representing the HEADs of the new branches
Then essentially takes care of the test.
Implementation of the actual wizard is not trivial but fairly
straightforward and linear, biggest issue is not being able to
`project_id.branch_ids[1]` to get the new branch, not sure why but it
seems to ignore the ordering, clearing the cache doens't fix it.
When creating the branches, add a sleep after each one for secondary
rate limiting purposes. Same when deleting branches.
Also the forwardbot has been updated to disable the forwardport cron
while a freeze is ongoing, this simplifies the freezing process.
Note: after recommendation of @aab-odoo, tried using `_applyChanges`
in `_checkState` but it simply did not work: the two relational fields
got completely frozen and were impossible to update, which is less
than ideal. Oh well, hopefully it works well enough like this for now.
Could not reproduce it in a shell, but in the original version
`self.env.cr.rowcount` would always be 0 after the `modified`.
Turns out the check is really completely dumb, because if we got any
match in `select for update` we're going to find the same on in the
update, and thus the conditional is unnecessary. I've no idea why I
did that.
Anyway remove the conditional and just always try to unstage the PR.
The Commit test object now allows a tree of `None` (or an empty dict,
same diff) in which case it will create an empty commit (a commit
which uses the same tree as its parent).
* the repository apparently takes a lot more time to
propagate (randomly) now, so wait until we can *see* it
* also add sleep after modification operations on the new repository
Ideally this should be done a lot more ubiquitously, but for now this
seems to more or less suffice.
To prep for the addition of the freeze wizard:
* move projects out of `pull_requests.py`
* then realize half the methods there have no relation to projects and
move them to more relevant places in `pull_requests.py`
* update corresponding crons (and tests using those crons) as the
methods have changed model, and the cron definitions thus need to be
updated
* split update to labels out of sending feedback comments while at it:
labels are not used much during tests so their manipulation can be
avoided; and labels are not as urgent as feedback so the crons can
be quite a bit slower
* move the project view out of `mergebot.xml` as well
Following #531 reviews from reviewers without an email set are
rejected.
For delegates this isn't very helpful, however for specifically
configured reviewers we can warn the configurer that they need to set
an email for things to work out.
* Adds a changelog page, linked from the main, with content
automatically loaded from the source. To avoid conflicts, each entry
is its own file and entries are grouped by the month during which
the update will (probably) be deployed
* The last group (most likely "last update") doesn't have a title, the
rest do.
* Add changelog entries from the last update so it's not too empty.
* Also update the layout for the alerts a bit: remove bottom margin to
reduce loss of whitespace.
When a commit is lacking the purpose (?) tag e.g. `[FIX]`, `[IMP]`,
..., a normal commit message of the form `<module>: <info>` marches
the looks of a git pseudo-header.
This results in a commit rewrite rejiggering the entire thing and
breaking the message by moving the title to the pseudo-headers and
mis-promoting either the `closes` line of body content to "title",
resulting in a really crappy commit message
e.g. odoo/odoo@d4aa9ad031.
Update the commit rewriting procedure to specifically skip the title
line, and re-inject it without processing in the output.
Fixes#540
Re-introduce a "squash" mode solely for the purpose of fixing up
commit messages without having to go and edit them: for now "squash"
only works for single-commit PRs, acts as a normal
integration (`rebase-ff`) *but* replaces the message of the commit
itself by that of the PR, similar to the `merge` modes.
This means maintainers can update commit messages to standards by
editing the PR description (though this is obviously sensible to
edition races with the original author).
Fixes#539
The list of outstanding forwardports was pretty messy as the ordering
was unclear and there was little way to really drill into the thing.
* Shows outstanding forward ports sorted by merged date ascending, the
oldest-merged PRs are the ones most in need of fixing while PRs
which were only just merged can safely be ignored.
* List reviewers with outstanding forward-ports, allow filtering by
clicking on their name, allow deseleting through the subtitle of the
page.
* Don't display reviewer in list when page is already filtered by
reviewer.
Also improve PR page a bit:
* Add reviewer.
* Add direct link to backend (closes#524).
Closes#529
Normally when a forwardport is updated the forward-bot cascades the
update onto its followups (if it has any), but takes care to keep the
followups attached as they were not updated "by hand".
In the case of odoo/odoo#77677 however that did not work and the
followup PRs got detached. Looking at the logs, it becomes flagrant
that there was a race condition: either Git took a long time to
respond to the push, or there was an IO slowdown which led to the
"local update" taking a very long time. Either way this allowed the
"synchronize" webhook from github to arrive before the current
transaction was committed, rolling back said transaction and making
the forwardbot assume this was a "real" sync and detach the followup
from its parent.
Locking the PR row up-front ought fix the issue, and also move the
local update to before having pushed: the "extra" commits in the local
cache don't matter too much even if pushing to github fails, they'll
be cleaned up by a GC eventually.
Also migrate the `-f` on push to `--force-if-includes` in order to
avoid possible race conditions on the push (since we're not fetching
the current branch, use the full-syntax explicit CAS form, that's
exactly what we're looking for anyway).
Fixes#541 (hopefully)
The forward-port process currently automatically adds delegates of a
PR as delegates on its forward ports, but that only works for
the *source* pull request.
If a delegate is added to a forward-port, they were not able to
approve the followups to that initial port, which makes little sense.
Fixes#548
Because only the first staging failure is considered "hard" and will
put the PR in error, when looking at staging logs it's possible to see
the same PR get staged over and over and over again, which is quite
confusing.
To make the logs less weird, always log a staging failure even when it
doesn't put the PR in error. Sadly this can't be tested as `capsys` is
not able to intercept an stderr inherited by a child process (capfd
doesn't work either).
Fixes#527
When using the forwardport's shortcut, the bot would not skip
already-approved PRs leading to a warning from the mergebot that the
PR was already approved (out of nowhere which was weird).
During the walk to the ancestors, skip any PR which is not
approvable (either already approved or in a state where that makes no
sense e.g. closed).
Fixes#543
