If staging gets re-enabled on a branch (or the branch itself gets
re-enabled), immediately run a staging cron as there may already be
PRs waiting, and no trigger enqueued: cron triggers have no payload,
they just get removed when the cron runs which means if a bunch of PRs
become ready for branch B with staging disabled, the cron is going to
run, it's going to stage nothing on that branch (because staging is
disabled) then it's going to delete all the triggers.
Fixes#979
Turns out you can configure format-patch with `--no-prefix` and some
people (*cough cough* mat) have that in their standard setup, so the
assumption of needing to strip 1 level of prefix does not necessarily
hold.
Also fix a few more issues:
- some people (*cough cough* still mat) also use `-n` by default,
which adds the series sequence (`n/m`) even for a single patch,
handle that correctly
- logging patch application errors is pretty useful when patching
fails and I'm trying to get the information via logs, do that
- especially when I decide to add error messages to tracking *but
forgot to show the chatter by default*, fix that as well
The commit-based patcher worked first try, and patch-based would have
worked too if not for those meddling kids. In the future it might be a
good idea to reify the stripping level (`-p`) on the patch object
though, and maybe provide a computed preview of the list of files to
patch, so issues are easier for the operator to diagnose.
- fix incorrect view specs (the action id comes first)
- add a wizard form and hook it into the PR, completely forgot to do
that
- usability improvements: filter branches to be in the same project as
the PR being backported, and older than the current PR's branch
The latter is a somewhat incomplete condition: ideally we'd want to
only allow selecting branches preceding the target of the *source* of
the PR being backported, that way we don't risk errors when
backporting forward-ports (the condition should be checked in the
final action but still).
Also we're only filtering by sequence, so we're missing the name part
of the ordering, hence if multiple branches have the same sequence we
may not allow selecting some of the preceding branches.
The initial idea to link an error to another one was a quick solution
to group them if they where related, but this became challenging
to copute metada regarding errors.
- The displayed error message was not always consistent with the real
root cause/the error that lead here.
- The aggregates (lets says, linked buils ids) could be the one of the
error, or from all error messages. Same for the versions, first seen, ..
This is confusing to knwo what is the leist we are managing and what is
the expecte result to display
Main motivation:
on a standard error page (will be changed to "assignment"), we want to
have the list of error message that is related to this one. We want to
know for each message (a real build error) what is the version,
first seen, ...
This will give more flexibility on the display,
The assigned person/team/test-tags, ... are moved to this model
The appearance data remains on the build error but are aggregate on the
assignation.
When a type error occurs when trying to format a message in a build log,
the suspicious are are joined with the message. But as the args may be a
tuple, an errors occurs when concatenating the message with the args
during the join.
With this commit, we ensure that the args are casted into a list.
pymarkdown's footnotes plugin *saves footnotes across invocations by
default*. Even if I understand the documented use case it seems wild
that it's not opt-in...
Anyway disable that resetting all internal state. Thanks rfr for the
inital report that things were looking odd.
Like limit, fw=no should restrict the table length, in this case to
just the current branch (as we're not forward porting at all).
Before this, `no` would not be applied as a limit visually, the table
would still go up to the main branch which is very confusing.
Fixes#962
As far as I can tell they are properly handled:
- In `handle_status` we let the http layer retry the query, which
pretty much always succeeds.
- In `Commit.notify`, we rollback the application of the current
commit, meaning it'll be processed by the next run of the cron,
which also seems to succeed every time (that is going through the
log I pretty much never notice the same commit being serialization
failure'd twice in a row).
Which we can trigger for faster action, this last item is not
entirely necessary as statuses should generally come in fast and
especially if we have concurrency errors, but it can't hurt.
This means the only genuine issue is... sql_db logging a "bad query"
every time there's a serialization failure.
In `handle_status`, just suppress the message outright, if there's an
error other than serialization the http / dispatch layer should catch
and log it.
In `Commit._notify` things are slightly more difficult as the execute
is implicit (`flush` -> `_write` -> `execute`) so we can't pass the
flag by parameter. One option would be to set and unset
`_default_log_exception`, but it would either be a bit dodgy or it
would require using a context manager and increasing the indentation
level (or using a custom context manager).
Instead just `mute_logger` the fucking thing. It's a bit brutish and
mostly used in tests, but not just, and feels like the least bad
option here...
Closes#805
For the longest time Github's `change` key was borked when
transitioning a description to and from empty. They fixed that during
2023, which I already saw and impacted on
DC (xmo-odoo/dummy_central@1ebed9d418
and xmo-odoo/dummy_central@937e87c2a4)
but this had yet to be taken in account by the mergebot.
This is now done, the code is functionally reverted to what it was
before I realised `changes` was hosed and moved off of it in
3da1874196.
Fixes#743
This is not a full user-driven backport thingie for now, just one
admins can use to facilitate thing and debug issues with the
system. May eventually graduate to a frontend feature.
Fixes#925
- replace manual token_urlsafe by actual token_urlsafe
- make conditional right side up and more readable
- replace match by fullmatch, should not change anything since we end
with a greedy universal match but is slightly more explicit
Missed it during the previous pass, probably because it's in the
middle of `pull_requests.py`. It's a classic template for triggered
crons since the model is just a queue of actions for the cron.
The mergebot tests have always been pretty gentle on system load which
is nice, however it's just looking at the list of longest tests that I
realised / re-membered the hook wait duration is 10 seconds for the
benefit of github, which doesn't really matter locally. This means on
interaction / cron-heavy tests the test might only be using on the
order of 10% CPU or something, that is a waste of time.
TBF this is easily compensated by increasing the concurrency of the
test suite (e.g. from 16 to 32 when I switched machine, but it seems
as if not more sensible to lower the webhook wait delay to something
more reasonable. 1s seems to be a good fit here, on my new computer at
n=16 it leads to the test suite running in 15mn at 600% CPU (which is
pretty good on a 6/12 CPU as it loads the system heavily but doesn't
completely bog it down).
Reducing it to 0.5s, the test suite takes the same duration but CPU
load increases to 770%, and errors creep up, likely a mix of
concurrency issues in the DB and dummy-central sending webhooks too
slowly as we compete with it for CPU resources (could actually make
sense to restrict the number of threads tokio can use). Reducing
concurrency could make this work better, but I think at this point
we're in a pretty good state, it's even somewhat reasonable to run the
test suite sequentially (taking about 1h10 but being functionally
invisible in terms of load).
If a PR is closed but part of an ongoing batch, the change in status
of the batch might be reflected on the PR still:
- if a PR is closed and the batch gets staged, the PR shows up as
being staged
- if the PR is merged then the batch gets merged, the PR shows up as
merged
Fixes#914
Also remove the unused `_tagstate` helper property.
When an image is build for the first time and the build fails, an
ImageNotfound Exception is raised when trying to push the image.
Whith this commit, a warning is emmited instead of crashing in such a
case.
Because of the false negatives due to github's reordering of events on
retargeting, blocking merge methods can be rather frustrating or the
user as what's happening and how to solve it isn't clear in that case.
Keep the warnings and all, but remove the blocking factor: if a PR
doesn't have a merge method and is not single-commit, just skip it on
staging. This way, PRs which are actually single-commit will stage
fine even if the mergebot thinks they shouldn't be.
Fixes#957
Unstaged changes can be useful or necessary for some tasks
e.g. absolute emergency (where even faking the state of a staging is
not really desirable, if that's even possible anymore), or changes
which are so broad they're difficult to stage (e.g. t10s updates).
Add a new object which serves as a queue for patch to direct-apply,
with support for either text patches (udiff style out of git show or
format-patch) or commits to cherry-pick. In the former case, the part
of the show / format-patch before the diff itself is used for the
commit metadata (author, committer, dates, message) whereas for the
commit version the commit itself is reused as-is.
Applied patches are simply disabled for traceability.
Fixes#926
- fix staging reasons containing escaped quotes (would render as
` ` to the end user)
- remove extra spacing around PR title @title/popovers
- simplify a few view conditionals through judicious use of `t-elif`
and nesting
- make `staging_end` non-computed as it's not computed anymore, just
set if and when the staging gets disabled
(146564a90a)
Given branch A, and branch B forked from it. If B removes a file which
a PR to A later modifies, on forward port Git generates a
modify/delete conflict (as in one side modifies a file which the
other deleted).
So far so good, except while it does notify the caller of the issue
the modified file is just dumped as-is into the working copy (or
commit), which essentially resurrects it.
This is an issue, *especially* as the file is already part of a
commit (rather tan just a U local file), if the developer fixes the
conflict "in place" rather than re-doing the forward-port from scratch
it's easy to miss the reincarnated file (and possibly the changes that
were part of it too), which at best leaves parasitic dead code in the
working copy. There is also no easy way for the runbot to check it as
adding unimported standalone files while rare is not unknown
e.g. utility scripts (to say nothing of JS where we can't really track
the usages / imports at all).
To resolve this issue, during conflict generation post-process
modify/delete to insert artificial conflict markers, the file should
be syntactically invalid so linters / checkers should complain, and
the minimal check has a step looking for conflict markers which should
fire and prevent merging the PR.
Fixes#896
A recent task introduced a record loop using self inside.
It doesn't respect an api multi classic loop but it isn't an issue
since onchange are always called on a single record.
Removing the loop on all onchange to clean it up.
Add warnings when trying to send comments / commands to PRs targeting
inactive branches.
This was missing leading to confusion, as one warning is clearly not
enough.
Fixes#941
By updating the staging timeout every time we run `_compute_state` and
still have a `pending` status, we'd actually bump the timeout *on
every success CI* except for the last one. Which was never the
intention and can add an hour or two to the mergebot-side timeout.
Instead, add an `updated_at` attribute to statuses (name taken from
the webhook payload even though we don't use that), read it when we
see `pending` required statuses, and update the staging timeout based
on that if necessary.
That way as long as we don't get *new* pending statuses, the timeout
doesn't get updated.
Fixes#952
- Switch to just `default` ci.
- Autouse fixture to init the master branch.
- Switch to `make_commits`.
- Merge `test_reopen_update` and `test_update_closed_revalidate` into
`test_update_closed`: the former did basically nothing useful and
the latter could easily be folded into `test_update_closed` by just
validating the new commit.
Idea is to help runbot/QA team to monitor other peoples tasks
easier. This way we will have a responsible person for each task
that someone else has assigned.
The goal of pr is two-fold:
1) We need to be able to better monitor the progress of tasks that
are not our own.
2) It introduces another metric with which we can measure individual
progress, and this can become main measuring metric for future non-technical
employees whose main goal will be making sure that none of the tasks become
rotten(not have any visible progress for months).
And unconditionally unstage when the HEAD of a PR is synchronised.
While a rebuild on a PR which was previously staged can be a false
positive (e.g. because it hit a non-derministic test the second time
around) it can also be legitimate e.g. auto-rebase of an old PR to
check it out. In that case the PR should be unstaged.
Furthermore, as soon as the PR gets rebuilt it goes back into
`approved` (because the status goes to pending and currently there's
no great way to suppress that in the rebuild case without also fucking
it up for the sync case). This would cause a sync on the PR to be
missed (in that it would not unstage the PR), which is broken. Fix
that by not checking the state of the PR beforehand, it seems to be an
unnecessary remnant of older code, and not really an optimisation (or
at least one likely not worth bothering with, especially as we then
proceed to perform a full PR validation anyway).
Fixes#950
