Before this change, a CI override would have to be replicated on most
/ all forward-ports of the base PR. This was intentional to see how it
would shake out, the answer being that it's rather annoying.
Also add a `statuses_full` computed field on PRs for the aggregate
status: the existing `statuses` field is just a copy of the commit
statuses which I didn't remember I kept free of the overrides so the
commit statuses could be displayed "as-is" in the backend (the
overrides are displayed separately). And while at it fix the PR
dashboard to use that new field: that was basically the intention but
then I went on to use the "wrong" field hence #433.
Mebbe the UI part should be displayed using a computed M2M (?)
as a table or as tags instead? This m2m could indicate whether the
status is an override or an "intrinsic" status.
Also removed some dead code:
* leftover from the removed tagging feature (removed the tag
manipulation but forgot some of the setup / computations)
* unused local variables
* an empty skipped test case
Fixes#439.
Fixes#433.
Currently when creating *merges* the commit message is the
concatenation of the PR title and the PR body.
However it can be convenient to include description test which would
not be included in the commit message e.g. PR template
stuff. "Thematic breaks" seem like a good way to do this: the commit
message will only include the content preceding the first thematic
break, everything else is ignored (except headings which are not
ignored, double negations FTW).
Might be that that's a bit excessive and we should only ignore what
follows the *last* thematic break. Or that there needs to be a more
specific marker. We'll see.
Fixes#443.
Because the commands were collected in a `dict[Command, Params]` a
command could only be present once *in the mergebot* (the forwardbot
already collected commands in a list).
* Update mergebot commands parser to collect commands in a list.
* Improve override to allow a comma-separated list of CIs to override.
* Simplify the parsing of delegate to generate one delegate command
per target (slightly less efficient if multiple logins are provided
but that is likely extremely rare).
Fixes#445
Because github materialises every labels change in the
timeline (interspersed with comments), the increasing labels churn
contributes to PRs being difficult to read and review.
This change removes the update of labels on PRs, instead the mergebot
will automatically send a comment to created PRs serving as a
notification that the PR was noticed & providing a link to the
mergebot's dashboard for that PR where users should be able to see the
PR state in detail in case they wonder what's what.
Lots of tests had to be edited to:
- remove any check on the labels of the PR
- add checks on the PR dashboard (to ensure that they're at least on
the correct "view")
- add a helper to handle the comment now added to every PR by the 'bot
- since that helper is needed by both mergebot and forwardbot, the
utils modules were unified and moved out of the odoo modules
Probably relevant note: no test was added for the dashboard
ACL, though since I had to explicitly unset the group on the repo used
for tests for things to work it looks to me like it at least excludes
people just fine.
Fixes#419
Convert overridable CI to an m2m from partners, it's significantly
more convenient to manipulate as multiple users can (and likely will)
have access to the same overrides, add a name_search so the override
is easy to find from a partner, and provide a view for the
overrides (with partners as tags).
Also make the repository optional on CI overrides.
Fixes#420
When retrieving unknown PRs, the process would apply all comments,
thereby applying eventual r+ without taking in account their
relationship to a force push. This means it was possible for a
mergebot-unknown PR to be r+'d, updated, retargeted, and the mergetbot
would consider it good to go.
The possible damage would be somewhat limited but still, not great.
Sadly Github simply doesn't provide access to the entire event stream
of the PR, so there is no way to even know whether the PR was updated,
let alone when in relation to comments. Therefore just resync the PR
after having applied comments: we still want to apply the merge method
& al, we just want to reset back to un-approved.
An other minor fix (for something we never actually hit but could):
reviews are treated more or less as comments, but separate at github's
level. The job would apply all comments then all reviews, so the
relative order of comments and reviews would be wrong.
Combine and order comments and reviews so they are applied
in (hopefully) the correct order of their creation / submission.
Closes#416
Historically PRs to disabled branches were treated like PRs to
un-managed branches: ignored.
However because they cay *already exist* when the branch is disabled,
the effects can be subtly different, and problematically so
e.g. ignoring all PR events on PRs targeting disabled branches means
we can't close them anymore, which is less than great.
So don't ignore events on PRs to disabled branches (creation, sync,
closing, and reopening) but also send feedback on PRs to disabled or
un-managed branches to indicate that they're not merge-able.
Fixes#410
If we can't stage a PR, rather than immediately put them in error wait
until they were the first we tried staging, otherwise they might have
been conflicting with the previous batch which ultimately won't be
merged for other reason and they would have worked as part of the next
batch.
Note: this commit will lead to false negatives because it's
batch-based rather than repo-based, so if the first batch only affects
repo A and the second batch only affects repo B, if the second batch
triggers a merge error it should be rejected immediately (as it's
applied on a "pristine" repo B) but this change will just bump it to
the next staging.
fixes#209
On per-repo status configurations, convert the "branch_ids" filter to
a domain on branches. Since the selection is generally
binary (statuses either apply to the master branch or apply to
non-master branch) this avoids error-prone missed updates where we
forget to enable statuses pretty much every time we fork off a new
branch.
Fixes#404
Normally opening a PR against a disabled branch is like opening a PR
against a branch which is not configured at all: the PR id ignored
entirely.
However if the PR already exists then the state of the branch isn't
normally checked when interacting with the branch, and it is possible
to trigger its staging, at which point the staging itself will crash:
on a project the branches are `active_test=False` so they're all
visible in the form, but when repos go search()-ing for the branch
they won't find it and will blow up.
Solution: only try staging on branches which are active. Fixes
odoo/runbot#408. Also do the same for checking stagings.
And while at it, fix#409 by wrapping each checking or staging into a
try/except and a savepoint. This way if a staging blows up it should
move on to the next branch instead of getting stuck.
The "blocked" computation would not take branch targets in account, so
PRs with the same label targeting *different branches* (possible if
somewhat rare due to our naming conventions) could block one another,
despite really being unrelated.
Also fix up some messages:
* if a PR is blocked due to having no merge method, it should say
that, not "has no merge" (no merge what?)
* format un-managed branches as `$repo:$branch` in logging messages,
`$repo#$thing` is for issues / PRs and `$branch` alone can be very
unhelpful
Closes#407
This is a regression due to the implementation details of
odoo/runbot#376: previously _parse_command would only yield the
commands it had specifically recognised (from a whitelist).
22e18e752b simplified the implementation
and (for convenience when adding new commands) now passes through any
command to the executor instead of skipping the unknown one.
But I forgot to update the executor to ignore unknown commands, so it
treats them as *failed* (since the success flag doesn't get set) and
assumes it's an ACL issue, so notifies the user that they can't do the
thing they never really asked for.
Add an end-case which skips the feedback bit for unrecognized
commands, which restores the old behavior.
Fixes#390
Currently it can be difficult to know why the mergebot refuses to
merge a PR (not that people care, they generally just keep sending new
commands without checking what the 'bot is telling them, oh well...).
Anyway knowing the CI state is the most complicated bit because the CI
tag only provides a global pass/fail for statuses but not a view of
specific statuses, and sometimes either the runbot or github fails to
notify the mergebot, leading to inconsistent internal states & shit.
By adding a tag per status context per PR, we can more clearly
indicate what's what.
Fixes#389
Apparently a long-running issue but not really a concern before the
new mergebot started sending a lot more statuses: stagings would show
a list of all statuses they received, including optional / irrelevant
statuses.
Get a list of required statuses and only show that on the staging
dropdowns.
Closes#387
Adds an `override` mergebot command. The ability to override is set on
an individual per-context per-repository basis, similar to but
independent from review rights. That is, a given individual may be
able to override the status X on repository A and unable to do so on
repository B.
Overrides are stored in the same format as regular statuses, but
independent from them in order to persist them across builds.
Only PR statuses can be overridden, statuses which are overridable on
PRs would simply not be required on stagings.
An alternative to implementing this feature in the mergebot would be
to add it to individual status-generating tools on a per-need
basis.
Pros of that alternative:
* display the correct status on PRs, currently the PR will be failing
status-wise (on github) but correct as far as the mergebot is
concerned
* remove complexity from the mergebot
Cons of that alternative:
* each status-generating tool would have to implement some sort of ACL
system
* each status-generating tool would have to receive & parse PR
comments
* each status-generating tool would have to maintain per-pr state in
order to track overrides
Some sort of helper library / framework ought make that rather easy
though. It could also be linked into the central provisioning system
thing.
Closes#376
Requirement for odoo/runbot#376: one can't expect there being someone
to override CI checks on stagings, so it only makes sense for checks
on PRs, which in turns requires that there could be checks only
required on PRs.
Could also be useful for features like incremental linting /
formatting, we may want to apply checks on PRs which filter on the
lines modified, but not require the entire software be reformatted at
once.
Having the required statuses be a mere list of contexts has become a
bit too limiting for our needs as it doesn't allow e.g. adding new
required statuses on only some branches of a repository (e.g. only
master), nor does it allow putting checks on only branches, or only
stagings, which would be useful for overridable checks and the like,
or for checks which only make sense linked to a specific revision
range (e.g. "incremental" linting which would only check whatever's
been modified in a PR).
Split the required statuses into a separate set of objects, any of
which can be separately marked as applying only to some branches (no
branch = all branches).
Fixes#382
While the head gets updated (properly), the squash flag did not which
could lead to odd results. Since a PR can only be reopened if it was
regular-pushed to (not after a force push) there are two scenarios:
* the PR updated to have 0 commits, closed, pushed to with one commit
then reopened, after reopening the PR would be marked as !squash and
would ask for a merge method (that's what happened with
odoo/odoo#51763)
* the PR has a single commit, is closed, pushed to then reopened,
after reopening the PR would still be marked a squash and potentially
straight rebased without asking for a merge method
Nothing would break per-se but both scenarios are undesirable.
Close#373
The logic of the partner merge wizard is to collect all relevant data
from source partners, write them to a destination partner, then remove
the sources.
This... doesn't work when the field in question has a UNIQUE
constraint (like github_login), because it's going to copy the value
from a source onto a dest which will blow the constraint, and so the
copy fails. In that case the user first has to *move over* the unique
field's value then they can use the wizard.
Just fix for the github login: take all sources, remove (and store)
their github logins, then write the login onto the dst.
An alternative would have been to *defer* the constraint, however:
* it only works on unique constraints, not unique indexes
* it requires the constraint to be declared DEFERRABLE
Closes#301
approving a PR which failed CI should trigger a feedback message since
6cb58a322d (#158), the code has not been
removed and the tests still pass.
However fwbot r+ would go through its own process for r+ which would
explain why that feedback is sometimes gone / lost (cf #327 and #336).
* make fwbot r+ delegate to mergebot r+
* add dedicated logging for this operation to better analyze
post-mortem
* automatically ping the reviewer to specifically tell them they're idiots
* move the feedback item out of the state change bit, send it even if
it's a useless r+ (because it's already r+'d)
* add a test for forward-ports
Closes#327, closes#336
Rather than try to fix up various bits where we search & all and
wonder what index we should be using, make the column a CIText.
For mergebot the main use case would be properly handling
delegate=XXX: currently if XXX is not a case-sensitive match we're
going to create a new partner with the new github login and
give *them* delegation, and the intended target of the delegation
isn't going to work correctly.
Also try to install the citext extension if it's not in the database,
and run the database-creation process with `check=True` so if that
fails we properly bubble up the error and don't try to run tests on a
corrupted / broken DB.
Fixes#318
As the odds of having more projects or more repos with different
requirements in the same project, the need to have different sets of
reviewers for different repositories increases.
As a result, rather than be trivial boolean flags the review info
should probably depend on the user / partner and the repo. Turns out
the permission checks had already been extracted into their own
function so most of the mess comes from testing utilities which went
and configured their review rights as needed.
Incidentally it might be that the test suite could just use something
like a sequence of commoditized accounts which get configured as
needed and not even looked at unless they're used.
Before this change, `r-` on a pr[p=0] does essentially nothing. At
most it will unstage if the PR had been (somewhat unnecessarily) r+'d
in the past but then the PR will get re-staged immediately.
To avoid this odd behaviour, if r- is sent to a p=0 PR not only is
the PR unreviewed (if it was reviewed) it always gets unstaged, and
its priority gets reset to 1 (high priority but doesn't bypass CI and
review). Also send a comment on that subject so followers of the pr
are notified.
Fixes#313
The staging cron was already essentially split between "check if one
of the stagings is successful (and merge it)" and "check if we should
create a staging" as these were two separate loops in the cron.
But it might be useful to disable these two operations separately
e.g. we might want to stop the creation of new staging but let the
existing stagings complete.
The actual splitting is easy but it turns out a bunch of tests were
"optimised" to only run the merge cron. Most of them didn't blow up
but it seems more prudent to fix them all.
fixesodoo/runbot#310
The PR creation had been fixed to always validate even without a
commit found (in case there was no need for a commit), but the update
of a PR in such a situation was not tested, and thus naturally did not
work because why would it work if it wasn't tested?
Also remove the conditional skip on updating a PR to a new head.
The test was checking things would work properly with
required_statuses being an empty string, because I'd also forgotten an
empty field becomes stored as `False` in the database, so trying
things out live neither the PRs nor the staging would work as their
assumption that they could straight split the required_statuses would
always fail.
Update the test to better match expectations, and hopefully this is
the end of that saga.
PRs transitioning to 'ready' had been checked and tested but turns out
I had completely forgotten to test that stagings would validate
properly therefore of course they didn't.
The issue here was I'd forgotten `''.split(',')` returns `['']` rather
than `[]`, so on an empty required_statuses the staging validator
would keep looking for a status matching the context `''` and would
never find it, keeping the staging pending until timeout. So most
likely the problem could have been resolved by just adding a condition
to
[r.strip() for r in repomap[c.sha].required_statuses.split(',')]
but I'd already done all the rest of the reorganisation by that point,
test pass and I think it's a somewhat better logic. Therefore I'll go
with that for now.
* properly handle empty required_statuses during staging validation
* remove the final postcondition, if we're missing commits which don't
require any statuse we should not care
* expand test to include up to merging PRs
* automatically create dummy commits when creating stagings, that way
the relevant commits are in the database (can't hurt)
PS: an other alternative would have been to filter out or skip ahead
on commits which don't require any statuses aka cmap &
required_statuse / cmap would not even have that entry
The pytest suite had been partially unified between mergebot and
forwardport but because of session-scoped modules it could not run
across those.
Make the db cache lazy and able to cache multiple databases, and move
the "current required module" to function scoped, this way things
should (and seem to) work properly on runs involving mergebot & fwbot.
Next step: xdist! (need to randomise repo names for that, probably).
Discussing #238 with @odony, the main concern was the difficulty of
understanding if things merged in one repo were related to things
merged in an other repo: currently, knowing this requires going to the
merged PR, getting its label, and checking the PRs with the same HEAD
in the other repository to see if there's a correlation (e.g. PRs
merged around the same time).
The current structure of the mergebot makes it reasonably easy to add
the other PRs of the batch in the pseudo-headers, such that we get
links to all "related" PRs in the head commit (and links back from the
commits which is probably less useful but...)
Fixes#238
1. if we try to stage a PR and realize we'd stored / checked the wrong
head, cancel the staging and notify the PR
2. provide a command to forcefully update pr heads (or at least check
that a PR's head is up to date)
Closes#241
It should have already been working, added an additional check for
update-then-retarget just in case but that worked out of the box. So
not sure why odoo/odoo#40106 failed.
Closes#256
* add a sorted method on fake models
* fix recordset equality to ignore ids order
* when creating commits on a ref, add a param to only *update* the ref
(forcefully): when simulating a force-push we don't want to *create*
a ref as that might silently be done in the wrong repository entirely
* fix pytest.skip call at the module level, not sure where it came
from and why I missed it until now
The fw-bot testing API should improve the perfs of mergebot tests
somewhat (less waiting around for instance).
The code has been updated to the bare minimum (context-managing repos,
change to PRs and replacing rolenames by explicit token provisions)
but extra facilities were used to avoid changing *everything*
e.g. make_commit (singular), automatic generation of PR refs, ...
The tests should eventually be updated to remove these.
Also remove the local fake / mock. Being so much faster is a huge
draw, but I don't really want to spend more time updating it,
especially when fwbot doesn't get to take advantage. A local /
lightweight fake github (as an external service over http) might
eventually be a good idea though, and more applicable (including to
third-parties).
If the CI is greatly backed up (either insufficient capacity or jobs
spike) a timeout which is normally perfectly fine might be
insufficient e.g. given a 2h timeout, if a job normally takes 80mn but
the staging's job starts 40mn after the staging was actually created
we're sunk. And cancelling the staging once the job has finally gotten
started is not going to improve load on the CI, it just wastes a CI
slot.
Therefore assume a `pending` event denotes the actual start of the job
on the CI, and reset the timeout to start from that moment so
ci_timeout is the timeout of the CI job itself, not of the staging
having been created.
Closes#202
Converge the pytest setups of runbot_merge and forwardport a bit
more (the goal is obviously to eventually share the infrastructure so
they run the same way).
* Cherrypicking is handrolled because there seems to be no easy way to
programmatically edit commit messages during the cherrypicking
sequence: `-n` basically squashes all commits and `-e` invokes a
subprocess. `-e` with `VISUAL=false` kinda sorta works (in that it
interrupts the process before each commit), however there doesn't
seem to be clean status codes so it's difficult to know if the
cherrypick failed or if it's just waiting for a commit of this step.
Instead, cherrypick commits individually then edit / rewrite their
commit messages:
* add a reference to the original commit
* convert signed-off-by to something else as the original commit was
signed off but not necessarily this one
* Can't assign users when creating PRs: only repository collaborators
or people who commented on the issue / PR (which we're in the
process of creating) can be assigned.
PR authors are as likely to be collaborators as not, and we can have
non-collaborator reviewers. So pinging via a regular comment seems
less fraught as a way to notify users.
Prepares for more complex edition operations on the forwardbot side
* split out the pseudo-headers from the message body
* don't separate the co-authored-by headers from the others, seems
unnecessary, we just need to ensure they're at the end so github
doesn't miss them (/it)
A deactivated branch is generally treated as unmanaged which is mostly
correct except for the case of retargeting an existing PR.
When a branch is deactivated the corresponding PRs are not removed, so
it's possible to have live PRs associated with ~unmanamaged
branches. When retargeting those PRs to active branches, the mergebot
would assume there was no existing PR and would create a duplicate,
then either get completely lost (before
a84595ea04) or blow up (after the same).
Properly search amongst deactivated branches for retargeting sources
so we update the relevant PR instead of trying to create duplicates.
Fixes#169
* extract method to create a PR object from a github result (from the
PR endpoint)
* move some of the remote's fixtures to a global conftest (so they can
be reused in the forwardbot)
