documentation/locale/zh_CN/LC_MESSAGES/iot.po
2020-01-12 01:31:52 +01:00

829 lines
26 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# SOME DESCRIPTIVE TITLE.
# Copyright (C) 2015-TODAY, Odoo S.A.
# This file is distributed under the same license as the Odoo package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
# Translators:
# mrshelly <mrshelly@hotmail.com>, 2019
# Connie Xiao <connie.xiao@elico-corp.com>, 2019
# fausthuang, 2019
# 山西清水欧度(QQ:54773801) <54773801@qq.com>, 2019
# LINYUN TONG <tong.linyun@elico-corp.com>, 2019
# F4NNIU <sparkamax@gmail.com>, 2019
# Martin Trigaux, 2019
# Jeffery CHEN Fan <jeffery9@gmail.com>, 2019
# 敬雲 林 <chingyun@yuanchih-consult.com>, 2019
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: Odoo 13.0\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-01-10 14:20+0100\n"
"PO-Revision-Date: 2019-10-03 09:46+0000\n"
"Last-Translator: 敬雲 林 <chingyun@yuanchih-consult.com>, 2019\n"
"Language-Team: Chinese (China) (https://www.transifex.com/odoo/teams/41243/zh_CN/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_CN\n"
"Plural-Forms: nplurals=1; plural=0;\n"
#: ../../iot.rst:5
msgid "Internet of Things (IoT)"
msgstr "物联网IoT"
#: ../../iot/config.rst:3
msgid "Configuration"
msgstr "基础配置"
#: ../../iot/config/connect.rst:3
msgid "Connect an IoT Box to your database"
msgstr "将 IoT 盒子连接到你的数据库"
#: ../../iot/config/connect.rst:5
msgid "Install the Internet of Things (IoT) App on your Odoo Database."
msgstr "在你的 Odoo 数据库中安装物联网IoT应用"
#: ../../iot/config/connect.rst:10
msgid "Go in the IoT App and click on Connect on the IoT Boxes page."
msgstr "进入 IoT 应用并单击 IoT 盒子页面上的 Connect 链接。"
#: ../../iot/config/connect.rst:15
msgid "Follow the steps to connect your IoT Box."
msgstr "按步骤连接到你的 IoT 盒子。"
#: ../../iot/config/connect.rst:21
msgid "Ethernet Connection"
msgstr "以太网连接"
#: ../../iot/config/connect.rst:23
msgid ""
"Connect to the IoT Box all the devices that have to be connected with cables"
" (ethernet, usb devices, etc.)."
msgstr "将所有必须使用线缆连接的设备网络、USB 设备等)插入 IoT 盒子。"
#: ../../iot/config/connect.rst:26
msgid "Power on the IoT Box."
msgstr "打开 IoT 盒子的电源"
#: ../../iot/config/connect.rst:28
msgid "Then click on the Scan button."
msgstr "然后点击“扫描”按钮。"
#: ../../iot/config/connect.rst:34
msgid "WiFi Connection"
msgstr "WiFi 连接"
#: ../../iot/config/connect.rst:36
msgid "Power on the IoT Box"
msgstr "打开 IoT 盒子的电源"
#: ../../iot/config/connect.rst:38
msgid "Copy the token"
msgstr "复制 Token"
#: ../../iot/config/connect.rst:43
msgid ""
"Connect to the IoT Box WiFi Network (make sure there is no ethernet cable "
"plugged in your computer)."
msgstr ""
#: ../../iot/config/connect.rst:49
msgid ""
"You will be redirected to the IoT Box Homepage (if it doesn't work, connect "
"to the IP address of the box). Give a name to your IoT Box (not required) "
"and paste the token, then click on next."
msgstr ""
#: ../../iot/config/connect.rst:57
msgid ""
"If you are on Runbot, do not forget to add the -all or -base in the token "
"(e.g. this token **http://375228-saas-11-5-iot-"
"f3f920.runbot16.odoo.com\\|4957098401** should become "
"**http://375228-saas-11-5-iot-f3f920-all.runbot16.odoo.com\\|4957098401**)."
msgstr ""
#: ../../iot/config/connect.rst:63
msgid ""
"Choose the WiFi network you want to connect with (enter the password if "
"there is one) and click on Submit. Wait a few seconds before being "
"redirected to your database."
msgstr ""
#: ../../iot/config/connect.rst:70
msgid "You should now see the IoT Box."
msgstr ""
#: ../../iot/config/connect.rst:76
msgid "IoT Box Schema"
msgstr ""
#: ../../iot/config/flash_sdcard.rst:3
msgid "Flashing your SD Card"
msgstr ""
#: ../../iot/config/flash_sdcard.rst:5
msgid ""
"In some case, you may need to reflash your IoT Boxs SD Card to benefit from"
" our latest updates."
msgstr ""
#: ../../iot/config/flash_sdcard.rst:9
msgid "Updating your SD Card with Etcher"
msgstr ""
#: ../../iot/config/flash_sdcard.rst:11
msgid ""
"Go to Balenas website and download `Etcher <http://wwww.balena.org>`__, "
"Its a free and open-source utility used for burning image files. Install "
"and launch it."
msgstr ""
#: ../../iot/config/flash_sdcard.rst:15
msgid ""
"Now, download the latest image `here "
"<http://nightly.odoo.com/master/posbox/iotbox/>`__, and extract it from the "
"zip file. Then, open *Etcher* and select the image. Select the drive to "
"flash (where your SD Card is) and click on *Flash*!."
msgstr ""
#: ../../iot/config/flash_sdcard.rst:19
msgid ""
"Now, your image will be automatically updated. You just have to wait 5 "
"minutes for it to finish."
msgstr ""
#: ../../iot/config/iot_notfound.rst:3
msgid "IoT Box not found"
msgstr ""
#: ../../iot/config/iot_notfound.rst:5
msgid ""
"When using your IoT Box, a common issue you might encounter is that your box"
" is not found on your database. Fortunately, there are a few easy steps you "
"can follow to find your IoT box."
msgstr ""
#: ../../iot/config/iot_notfound.rst:10
msgid "HTTPS Issues"
msgstr ""
#: ../../iot/config/iot_notfound.rst:12
msgid "Your IoT Box is not found? You probably have https issues!"
msgstr ""
#: ../../iot/config/iot_notfound.rst:14
msgid ""
"To check it, go to your database and verify if your database address starts "
"with an https (like https://www.odoo.com). If this is the case, then you may"
" have problems with your IoT Box image. It should be version 18.12 or later."
msgstr ""
#: ../../iot/config/iot_notfound.rst:19
msgid ""
"If your IoT Box image is from an earlier version, then you will have to "
"reflash the SD card of your IoT Box to update the image (the latest image "
"can be found `here <http://nightly/odoo.com>`__)."
msgstr ""
#: ../../iot/config/iot_notfound.rst:23
msgid ""
"You can find the documentation about SD card flashing here (`here "
"<https://docs.google.com/document/d/1bqKsZhWqMqI4mhv4ltF61M_QPiBCHygYjjvkhsCTdaY/edit>`__)."
msgstr ""
#: ../../iot/config/pos.rst:3
msgid "Use the IoT Box for the PoS"
msgstr ""
#: ../../iot/config/pos.rst:9
msgid "Prerequisites"
msgstr "先决条件"
#: ../../iot/config/pos.rst:11
msgid "Before starting, make sure you have the following:"
msgstr ""
#: ../../iot/config/pos.rst:13
msgid "An IoT Box"
msgstr ""
#: ../../iot/config/pos.rst:15
msgid "A 2A Power adapter with pi 3 b+ 2.5 A"
msgstr ""
#: ../../iot/config/pos.rst:17
msgid "A computer or tablet with an up-to-date web browser"
msgstr "一台带最新的Web浏览器的计算机或平板电脑。"
#: ../../iot/config/pos.rst:19
msgid ""
"A running SaaS or Odoo instance with the Point of Sale and IoT apps "
"installed"
msgstr ""
#: ../../iot/config/pos.rst:22
msgid "A local network setup with DHCP (this is the default setting)"
msgstr ""
#: ../../iot/config/pos.rst:24
msgid ""
"An Epson USB TM-T20 Printer or another ESC/POS compatible printer "
"(officially supported printers are listed at the `POS Hardware page "
"<https://www.odoo.com/page/pos-ipad-android-hardware>`__)"
msgstr ""
#: ../../iot/config/pos.rst:28
msgid "A Honeywell Eclipse USB Barcode Scanner or another compatible scanner"
msgstr "霍尼韦尔的Eclipse USB条码扫描仪或其他兼容的扫描仪"
#: ../../iot/config/pos.rst:30
msgid "An Epson compatible cash drawer"
msgstr "爱普生兼容钱箱"
#: ../../iot/config/pos.rst:32
msgid "An RJ45 Ethernet Cable (optional, WiFi is built in)"
msgstr "RJ45 网线(内置 WiFi 可选)"
#: ../../iot/config/pos.rst:35
msgid "Set Up"
msgstr "设置"
#: ../../iot/config/pos.rst:37
msgid ""
"To connect hardware to the PoS, the first step is to connect an IoT Box to "
"your database. For this, follow this :doc:`documentation <connect>`."
msgstr ""
#: ../../iot/config/pos.rst:44
msgid "Then, you have to connect the peripheral devices to your IoT Box."
msgstr ""
#: ../../iot/config/pos.rst:46
msgid ""
"Officially supported hardware is listed on `the POS Hardware page "
"<https://www.odoo.com/page/pos-ipad-android-hardware>`__, but other hardware"
" might work as well."
msgstr ""
#: ../../iot/config/pos.rst:50
msgid "**Printer**: Connect an ESC/POS printer to a USB port and power it on."
msgstr " **打印机**: 一个ESC/ POS打印机连接到USB端口, 并接通电源。"
#: ../../iot/config/pos.rst:53
msgid ""
"**Cash drawer**: The cash drawer should be connected to the printer with an "
"RJ25 cable."
msgstr " **钱箱**: 钱箱应连接用RJ25电缆连接打印机。"
#: ../../iot/config/pos.rst:56
msgid ""
"**Barcode scanner**: Connect your barcode scanner. In order for your barcode"
" scanner to be compatible it must behave as a keyboard and must be "
"configured in **US QWERTY**. It also must end barcodes with an Enter "
"character (keycode 28). This is most likely the default configuration of "
"your barcode scanner."
msgstr ""
" **条形码扫描仪**: 连接条形码扫描器。为了使您的条形码扫描仪是兼容的, 必须表现为键盘, 必须配置 **US QWERTY** "
"。它还必须一个输入字符(键码28)结束条形码。这很可能是你的条码扫描仪的默认配置。"
#: ../../iot/config/pos.rst:62
msgid "**Scale**: Connect your scale and power it on."
msgstr " **电子磅秤**: 连接你的电子磅秤和接通电源。"
#: ../../iot/config/pos.rst:64
msgid ""
"**Ethernet**: If you do not wish to use Wi-Fi, plug in the Ethernet cable. "
"Make sure this will connect the IoT Box to the same network as your POS "
"device."
msgstr ""
#: ../../iot/config/pos.rst:68
msgid ""
"**Wi-Fi**: The current version of the IoT Box has Wi-Fi built in. Make sure "
"not to plug in an Ethernet cable when booting, because all Wi-Fi "
"functionality will be bypassed when a wired network connection is available "
"on boot."
msgstr ""
#: ../../iot/config/pos.rst:73
msgid ""
"Once it's done, you can connect the IoT Box to your PoS. For this, go in "
"Point of Sale > Configuration > PoS, tick the box \"IoT Box\" and select the"
" IoT Box you want to connect with. Save the changes."
msgstr ""
#: ../../iot/config/pos.rst:77
msgid "Set up is done, you can launch a new PoS Session."
msgstr ""
#: ../../iot/config/pos.rst:80
msgid "Troubleshoot"
msgstr "疑难解答"
#: ../../iot/config/pos.rst:83
msgid "The PoS cannot connect to the IoT Box"
msgstr ""
#: ../../iot/config/pos.rst:85
msgid ""
"The easiest way to make sure the IoT Box is properly set-up is to turn it on"
" with the printer plugged in as it will print a receipt indicating any error"
" if encountered or the IoT Box's IP address in case of success. If no "
"receipt is printed, check the following steps:"
msgstr ""
#: ../../iot/config/pos.rst:91
msgid ""
"Make sure the IoT Box is powered on, indicated by a brightly lit red status "
"LED."
msgstr ""
#: ../../iot/config/pos.rst:94
msgid ""
"Make sure the IoT Box is ready, this is indicated by a brightly lit green "
"status LED just next to the red power status LED. The IoT Box should be "
"ready ~2 minutes after it is started."
msgstr ""
#: ../../iot/config/pos.rst:98
msgid ""
"Make sure the IoT Box is connected to the same network as your POS device. "
"Both the device and the IoT Box should be visible in the list of connected "
"devices on your network router."
msgstr ""
#: ../../iot/config/pos.rst:102
msgid ""
"If you specified the IoT Box's IP address in the configuration, make sure it"
" corresponds to the ip address printed on the IoT Box's status receipt."
msgstr ""
#: ../../iot/config/pos.rst:106
msgid "Make sure that the POS is not loaded over HTTPS."
msgstr "确认 POS 部分未开启 HTTPS 访问."
#: ../../iot/config/pos.rst:108
msgid ""
"A bug in Firefox's HTTP implementation might prevent the autodiscovery from "
"working reliably. You could also manually set up the IoT Box's IP address in"
" the POS configuration."
msgstr ""
#: ../../iot/config/pos.rst:113
msgid "The Barcode Scanner is not working"
msgstr "条码枪不能使用"
#: ../../iot/config/pos.rst:115
msgid ""
"The barcode scanner must be configured in US QWERTY and emit an Enter after "
"each barcode. This is the default configuration of most barcode readers. "
"Refer to the barcode reader documentation for more information."
msgstr "在US QWERTY中配置条形码扫描仪, 扫码后输入。这是大多数条形码扫描仪的默认配置。有关更多信息,请参阅条形码文档。"
#: ../../iot/config/pos.rst:120
msgid ""
"The IoT Box needs a 2A power supply to work with some barcode scanners. If "
"you are not using the provided power supply, make sure the one you use has "
"enough power."
msgstr ""
#: ../../iot/config/pos.rst:124
msgid ""
"Some barcode scanners will need more than 2A and will not work, or will work"
" unreliably, even with the provided power supply. In those case you can plug"
" the barcode scanner in a self-powered USB hub."
msgstr "一些条形码扫描仪将需要超过2A的电源, 有时即使提供了电源也不可靠。在这些情况下,你可以把条形码扫描器连接在自供电的USB集线器上。"
#: ../../iot/config/pos.rst:129
msgid ""
"Some poorly built barcode scanners do not advertise themselves as barcode "
"scanners but as a usb keyboard instead, and will not be recognized by the "
"IoT Box."
msgstr ""
#: ../../iot/config/pos.rst:134
msgid "The Barcode Scanner is not working reliably"
msgstr "条码枪确实不能使用"
#: ../../iot/config/pos.rst:136
msgid ""
"Make sure that no more than one device with 'Scan via Proxy'/'Barcode "
"Scanner' enabled are connected to the IoT Box at the same time."
msgstr ""
#: ../../iot/config/pos.rst:140
msgid "Printing the receipt takes too much time"
msgstr "打印小票太慢"
#: ../../iot/config/pos.rst:142
msgid ""
"A small delay before the first print is expected, as the IoT Box will do "
"some preprocessing to speed up the next printings. If you suffer delays "
"afterwards it is most likely due to poor network connection between the POS "
"and the IoT Box."
msgstr ""
#: ../../iot/config/pos.rst:148
msgid "Some characters are not correctly printed on the receipt"
msgstr "收据上打印出来的字母有些错误"
#: ../../iot/config/pos.rst:150
msgid ""
"The IoT Box does not support all languages and characters. It currently "
"supports Latin and Cyrillic based scripts, with basic Japanese support."
msgstr ""
#: ../../iot/config/pos.rst:155
msgid "The printer is offline"
msgstr "打印机处于离线"
#: ../../iot/config/pos.rst:157
msgid ""
"Make sure the printer is connected, powered, has enough paper and has its "
"lid closed, and is not reporting an error. If the error persists, please "
"contact support."
msgstr "确保打印机是连接, 有电源,有足够的纸, 它的盖子是关闭的, 并且没有报告错误。如果错误出现, 请联系技术支持。"
#: ../../iot/config/pos.rst:162
msgid "The cashdrawer does not open"
msgstr "钱箱无法打开"
#: ../../iot/config/pos.rst:164
msgid ""
"The cashdrawer should be connected to the printer and should be activated in"
" the POS configuration."
msgstr "现金盒应该连到打印机, 在POS中应将设置激活。"
#: ../../iot/devices.rst:3
msgid "Devices"
msgstr "设备"
#: ../../iot/devices/camera.rst:3
msgid "Connect a Camera"
msgstr ""
#: ../../iot/devices/camera.rst:5
msgid ""
"When using your *IoT Box* in Odoo, you could need to use a camera. As it can"
" be done in a few steps, this device is really easy to configure. Then, you "
"can use it in your manufacturing process and link it to a control point. "
"Doing so will allow you to take pictures when you reach the chosen quality "
"control point."
msgstr ""
#: ../../iot/devices/camera.rst:12 ../../iot/devices/footswitch.rst:13
#: ../../iot/devices/printer.rst:11
msgid "Connection"
msgstr "连接"
#: ../../iot/devices/camera.rst:14
msgid ""
"To connect the camera to the *IoT Box*, simply combine the two by cable."
msgstr ""
#: ../../iot/devices/camera.rst:18
msgid "In some cases, a serial to USB adapter could be needed."
msgstr ""
#: ../../iot/devices/camera.rst:20
msgid ""
"If your camera is a `*supported one* <https://www.odoo.com/page/iot-"
"hardware>`__, there is no need to set up anything as it will be detected as "
"soon as it is connected."
msgstr ""
#: ../../iot/devices/camera.rst:27
msgid ""
"In some cases, you could need to restart the box and download your cameras "
"drivers from the box. To do so, go to your *IoT Box Home Page* and click on "
"*drivers list*. Then, click on load drivers."
msgstr ""
#: ../../iot/devices/camera.rst:35
msgid "Link a Camera to a Quality Control Point"
msgstr ""
#: ../../iot/devices/camera.rst:38 ../../iot/devices/measurement_tool.rst:42
msgid "With the Manufacturing app"
msgstr ""
#: ../../iot/devices/camera.rst:40
msgid ""
"In your *Quality app*, you can setup the device on a *Quality Control "
"Point*. Go to the *Control Points* menu, under *Quality Control* and open "
"the control point you want to link with the camera."
msgstr ""
#: ../../iot/devices/camera.rst:44
msgid ""
"Now, you can edit the control point and select the device from the dropdown "
"list. Now, hit save."
msgstr ""
#: ../../iot/devices/camera.rst:50
msgid ""
"Then, your camera can be used with the picked *Control Point*. During the "
"manufacturing process, reaching the *Quality Control Point* you chose before"
" will allow you to take a picture."
msgstr ""
#: ../../iot/devices/footswitch.rst:3
msgid "Connect a Footswitch"
msgstr ""
#: ../../iot/devices/footswitch.rst:5
msgid ""
"When working, it is always better to have your two hands available. Using "
"Odoos *IoT Box* and a footswitch will allow it."
msgstr ""
#: ../../iot/devices/footswitch.rst:8
msgid ""
"In fact, you will be able to go from one screen to another by using your "
"foot and the footswitch. Really convenient, it can be configured in a few "
"steps."
msgstr ""
#: ../../iot/devices/footswitch.rst:15
msgid ""
"Connecting the footswitch to the *IoT Box* is easy, you just have to combine"
" the two by cable."
msgstr ""
#: ../../iot/devices/footswitch.rst:19
msgid "In some cases, a serial to USB adapter may be needed."
msgstr ""
#: ../../iot/devices/footswitch.rst:21
msgid ""
"If your footswitch is a `supported one <https://www.odoo.com/page/iot-"
"hardware>`__, there is no need to set up anything since it will be "
"automatically detected when connected."
msgstr ""
#: ../../iot/devices/footswitch.rst:28
msgid ""
"If it is not a supported one, you may need to restart the box and download "
"your footswitchs drivers from the box. To do so, go to the *IoT Box Home "
"Page* and click on *drivers list*. Then, click on load drivers."
msgstr ""
#: ../../iot/devices/footswitch.rst:37
msgid "Link a Footswitch to a Workcenter"
msgstr ""
#: ../../iot/devices/footswitch.rst:39
msgid ""
"To link the footswitch to an action, it needs to be configured on a "
"workcenter. Go to the workcenter you want to use the footswitch in and add "
"the device in the *IoT Triggers* tab. Then, you can link it to an action and"
" also add a key to trigger it."
msgstr ""
#: ../../iot/devices/footswitch.rst:47
msgid ""
"Note that the one that is first in the list will be chosen. So, the order "
"matters! In the picture above, using the footswitch will, for example, "
"automatically skip the current part of the process you work on."
msgstr ""
#: ../../iot/devices/footswitch.rst:52
msgid ""
"When you are on the work order screen, a status button indicates if you are "
"correctly connected to the footswitch."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:3
msgid "Connect a Measurement Tool"
msgstr ""
#: ../../iot/devices/measurement_tool.rst:5
msgid ""
"With Odoos *IoT Box*, it is possible to connect measurement tools to your "
"database. Find the list of supported devices here: `Supported devices "
"<https://www.odoo.com/page/iot-hardware>`__,."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:10
msgid "Connect in USB"
msgstr ""
#: ../../iot/devices/measurement_tool.rst:12
msgid ""
"To add a device connected by USB, just plug the USB cable in the *IoT Box*, "
"restart the Box and the device should appear in your Odoo database."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:19
msgid ""
"If the device is not found, make sure the drivers have well been loaded on "
"your IoT Box. For this, connect to the *IoT Box Homepage* and click on load "
"drivers."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:27
msgid "Connect in Bluetooth"
msgstr ""
#: ../../iot/devices/measurement_tool.rst:29
msgid ""
"Activate the Bluetooth on your device (see your device manual for further "
"explanation) and the IoT Box will automatically try to connect to the "
"device."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:33
msgid "Here is an example of what it should look like:"
msgstr ""
#: ../../iot/devices/measurement_tool.rst:39
msgid "Link a measurement tool to a quality control point"
msgstr ""
#: ../../iot/devices/measurement_tool.rst:44
msgid ""
"In your *Quality app*, you can setup a device on your *Quality Control "
"Points*. To do so, go to the *Control Points* menu, under *Quality Control* "
"and open the control point to which you want to assign a measurement tool."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:49
msgid ""
"Now, you can edit the control point and choose the device from the dropdown "
"list. Then, hit save."
msgstr ""
#: ../../iot/devices/measurement_tool.rst:55
msgid ""
"Now, your measurement tool is linked to the chosen *Control Point*. The "
"value, which needs to be changed manually, will be automatically updated "
"while the tool is being used."
msgstr ""
#: ../../iot/devices/printer.rst:3
msgid "Connect a Printer"
msgstr ""
#: ../../iot/devices/printer.rst:5
msgid ""
"When using your *IoT Box* in Odoo, you could need to use a printer. Doing so"
" is easy and convenient as it can be done in a few steps. Then, you can use "
"it to print receipts, orders or even reports in different Odoo apps."
msgstr ""
#: ../../iot/devices/printer.rst:13
msgid ""
"To connect the printer to the *IoT Box*, you just have to combine the two by"
" cable."
msgstr ""
#: ../../iot/devices/printer.rst:17
msgid "Sometimes, a serial to USB adapter may be needed."
msgstr ""
#: ../../iot/devices/printer.rst:19
msgid ""
"If your printer is a `supported one <https://www.odoo.com/page/iot-"
"hardware>`__, there is no need to set up anything because it will be "
"automatically detected as soon as it is connected."
msgstr ""
#: ../../iot/devices/printer.rst:24
msgid "The printer can take up to two minutes to appear in your devices list."
msgstr ""
#: ../../iot/devices/printer.rst:29
msgid ""
"In some cases, you may need to restart the box and download your printers "
"drivers from the box. To do so, go to the *IoT Box Home Page* and click on "
"*drivers list*. Then, click on load drivers."
msgstr ""
#: ../../iot/devices/printer.rst:37
msgid "Link the Printer"
msgstr ""
#: ../../iot/devices/printer.rst:40
msgid "To Work Orders"
msgstr ""
#: ../../iot/devices/printer.rst:42
msgid ""
"You can link *Work Orders* to printers via a *Quality Control Point* to "
"print labels for manufactured products."
msgstr ""
#: ../../iot/devices/printer.rst:45
msgid ""
"To do so, you need to create a *Quality Control Point* from the *Quality* "
"app. Then, you can select the correct manufacturing operation and the work "
"order operation. In type, choose *Print Label* and hit save."
msgstr ""
#: ../../iot/devices/printer.rst:53
msgid ""
"Now, each time you reach the quality control point for the chosen product, a"
" *Print Label* button will appear."
msgstr ""
#: ../../iot/devices/printer.rst:60
msgid "To Reports"
msgstr ""
#: ../../iot/devices/printer.rst:62
msgid ""
"You can also link a type of report to a certain printer. In the *IoT* app, "
"go to the *Devices* menu and select the printer you want to set up."
msgstr ""
#: ../../iot/devices/printer.rst:69
msgid "Now, go to the *Printer Reports* tab."
msgstr ""
#: ../../iot/devices/printer.rst:74
msgid ""
"Hit edit and then, click on *Add a line*. In the window that shows up, check"
" all the types of reports that should be linked to this printer. Click on "
"select and save."
msgstr ""
#: ../../iot/devices/printer.rst:81
msgid ""
"Now, each time you click on *Print* in the control panel, instead of "
"downloading a PDF, it will send it to the selected printer and automatically"
" print it."
msgstr ""
#: ../../iot/devices/printer.rst:86
msgid "Print Receipts from the PoS"
msgstr ""
#: ../../iot/devices/printer.rst:88
msgid ""
"You can link a printer to your *Point of Sale* app so you can print receipts"
" directly from your *PoS*."
msgstr ""
#: ../../iot/devices/printer.rst:91
msgid ""
"Doing so is really easy. Go to your *Point of Sale* app and open your *PoS* "
"settings, under *Configuration*. There, click on *Edit* and check the *IoT "
"Box* feature. Then, enable the *Receipt Printer*."
msgstr ""
#: ../../iot/devices/printer.rst:98
msgid ""
"Now, on your *PoS* view, you will be able to print different kinds of "
"tickets: **receipts**, **sale details** and **bills**."
msgstr ""
#: ../../iot/devices/printer.rst:101
msgid ""
"For the receipt, it will be printed once the order is validated. The process"
" is automated when you enable the feature in your *PoS*."
msgstr ""
#: ../../iot/devices/printer.rst:104
msgid ""
"Sales details can be printed by clicking on the printer icon on the navbar "
"at the top of the *PoS*. It will print the details of the sales of the "
"current day."
msgstr ""
#: ../../iot/devices/printer.rst:111
msgid ""
"As for the bill, it is only available in restaurant mode. In your restaurant"
" settings, activate bills and a *Bill* button will appear in the left panel."
" Click on it and it will print the bill."
msgstr ""
#: ../../iot/devices/printer.rst:119
msgid "Print Orders in the kitchen"
msgstr ""
#: ../../iot/devices/printer.rst:121
msgid "In restaurant mode, you can send order tickets to the kitchen."
msgstr ""
#: ../../iot/devices/printer.rst:123
msgid ""
"To do so, go to the *PoS* app and open your *PoS* settings. Then, tick "
"*Order Printer*."
msgstr ""
#: ../../iot/devices/printer.rst:129
msgid ""
"Now, go to the *Printers* menu. Hit create and select the *IoT Box* with all"
" the categories of product that should be printed in the *Printer Product "
"Categories* field."
msgstr ""
#: ../../iot/devices/printer.rst:136
msgid ""
"In the *PoS*, when you add or remove a product from one of the selected "
"categories, the button *Order* will be green. If you click on it, a ticket "
"will be printed."
msgstr ""