The previous version of the code assumed `pr['body']` is always a
string, which is not correct, when the PR body is emptied the body
itself is removed (its value is `None`).
Add a case for this in the PR edition test, and avoid blowing up (or
adding empty newlines) when the PR body is empty. For PR creation this
issue was fixed in c2db5659d8 but
apparently I missed that the exact same issue occurs just a few lines
above.
Also turns out github does *not* send change information when the body
is updated from (or to?) `None`, so don't even bother with that, just
check every time if the overall message has been updated.
Fixes#629
Stop *staging* release PRs: they are normally fairly simple and should
not fail their staging outside of unreliable tests (or possibly a few
edge cases e.g. forgot one version change thing), however staging them
creates the possibility of a "version hole" on the release branch
which is undesirable.
Instead, immediately and unconditionally push the release commits onto
the newly created branches, if there are things which don't work they
can be fixed afterwards (and the process refined, maybe).
Also add the same feature for *bump* PRs, with the difference that the
bump PRs are not created / requested by default (they have to be opted
in individually).
For convenience, add a feature which automatically finds the PRs via
inputting the label (not really tested yet).
Closes#603
Because the searching of the PR occurs *right* after the PR was
created on the server, despite the additional operations (status,
approval) it's apparently possible for the lookup of the new PR to
occur about the same time the PR is being created, kinda, maybe?
On DS it triggers very reliably for every PR but the first. By moving
the retrieval after the repo timeout & we've run the crons, we near
guarantee the PRs are visible (it's possible for things to fail on
grounds of github reliability, but then they'd have failed *even more*
before).
- add a logging entry for PR updates
- change the generic log entry to log the sender (of the event) rather
than the PR author
- fix the post-facto PR loader to more systematically and reliably set
a `sender`
It's likely that the PR pages are seen more commonly than the
dashboard by most users, so add alerts there in case users wonder
what's happening.
Fixes#580
Check remains a tad dodgy, but since we're actually porting from
`root` (the earliest ancestor of `self`) it makes more sense to
sanity-check that *its* commits remain visible.
Also log that as it makes a tad more sense, hopefully.
Closes#600
The log message only indicated whether the PR was squashed or not, but
that's not actually useful.
Improve the message to log the actual merge method, for
information. The old "squash" (aka squash flag set and no merge
method, since an actual squash merge method was reintroduced a while
ago) has been renamed to "single" for the purpose of this display.
This is an important bit of information but it was not visible without
going into the backend.
`user-select-none` doesn't work in BS3 but that way it'll be ready for
an eventual update. Currently when hovering the badge the cursor
switches to text selection, and the text is selectable, which is
useless.
Complements 4e235a2 and finishes the fixes for #617
- trying to r+ a detached PR *via the forwardbot* should warn, same as
a non-forwardport PR
- the following sibling of a closed PR should be detached from
it (probably)
- when a closed forward-port PR is reopened, there should be a
notification that it is detached and merged via mergebot
Fixes#617
Before this, until the first status for a required context the status
would appear as pending, but would be have oddly (e.g. not clickable).
Update the style of such statuses for clarity:
- use a light background to show them as inactive
- use the `wait` cursor to show their status as oddball (and not clickable)
Setting this styling on the link (or even `li`) doesn't seem to work,
so set it on the `ul`, the actual active links will set the relevant
"active" cursor instead, which seems to work fine.
While at it, extract the status menu to its own template and unify the
disparate bits, mainly in that both the main dashboard and the
per-branch list display the staging instant in UTC on hover: before,
the main dashboard would display a relative delta and provide the
UTC-formatted instant on hover, but the branch would only show a zoned
ISO-8601 instant.
While adjusting is easy, it's unnecessary, we can easily provide the UTC
staging instant there).
Existing conflict style is the local default ("merge", most
likely). `diff3` is a lot more informative as it provides the common
ancestor's code for the hunk, which helps see how the two branches
diverged and thus resolve the conflict.
Even better would be zdiff3 but that's a bit too recent...
Fixes#619
Old messages were quite inconsistent in their pinging of the PR author
and reviewer.
Reviewed messages (probably missed some but...) and try to more
consistently ping when the feedback requires some sort of action in
order to proceed.
Fixes#592
A few fixes and improvements after testing the feature:
- ensure the provisioned users are created as internal (not portal)
- assume oauth is installed and just crash if it's not
- handle a user not having an email (ignore)
- return value from json handler, otherwise JsonRequest sends no
payload which is *weird*
Stagings would be cancelled automatically if the PR's commits were
updated, but not if the target (base) was changed, even though that
has a drastic impact on staging.
Add hooks to unstage PRs if their base is updated, or if their message
is updated and relevant to staging (merge or rebase-merge methods).
Fixes#604
Extract the creation of a PR link (to github) as a dedicated
template for easier updates, and to use `display_name`
everywhere (instead of reimplementing it by name).
Also implement support for repo-level groups setting for information
hiding.
Fixes#590
When a staging's fast-forward (to the target branch) fails, the
mergebot would provide no useful information on the staging or the
dashboard.
This is because the reason was set to the HTTP status, which in case
of a fast-forward error is just "422 client error: unprocessable
entity".
Improve this by trying to parse github's response in that case, and
using the JSON error message as failure reason. This provides more
useful failure information like "update is not a fast forward",
"reference does not exist", or a branch protection failure.
Closes#591
- code in the various menus added over time through the UI (queues,
configuration, ...)
- update / improve PR layout a tick
- fix "outstanding forward ports" count on the dashboard
- improve hover title / help on dashboard
- add date of last modification (usually date of success / failure)
- make casing more coherent (everything lowercase)
- add explicit note that UTC date on staged at label is staged at datetime
- rediscover yet again that the staging information is when hovering
on the staging *except the staged at label*
- improve `PullRequest.unstage` to always insert the PR at the start of the
reason when cancelling the staging, for clarity / traceability
Closes#560, closes#609
New accounts endpoint such that the SSO can push new pre-configured
users / employees directly. This lowers maintenance burden.
Also remove one of the source partners from the merge test, as
ordering seems wonky for unclear reasons leading to random failures of
that test.
Source cleanup will check in multiple place for potentially used
commits. This maked the cleanup logic complex, plus limit the usable
commits in python steps. The current use case is to export the mergebase
commits.
The poposed solution is to save the exported commit and clean this list
when the build is done. All commit in this list cannot be cleaned.
The main motivation is to be able to see existing config_data on params
and edit configuration on triggers.
A simple version would be to use the `FieldChar` with a simple
`JSON.stringify` formater, but having some indent on field make it
easier to read and edit.
The multiline need make it closet to the `FieldText` than the `FieldChar`
but the reset makes the browser freeze.
The actual way to add a custom multibuild on a dev bundle will be:
- use the multibuild wizard to create 2 configs and 2 steps
- add this config on the bundle
- customize this config to make it fatser by installing/restoring...
The usefull parameters are the number of build, the test tags and
modules to install.
Another usefull operation is to restore a dump instead of installing,
especially for post install test only breaking on full databases.
This commit proposes to replace the multi build wizard with a custom
trigger wizard. The main idea is to have generic config, parametrized by
config_data. The wizard will only help to generate the corresponding
config_data.
On two of the freezes, thereafter the logs showed serial crashes in
the forwardport cron when trying to find the insertion point for a new
forward-port.
The first time was not really diagnosed, the second time the cause was
found to be a retargeted PR which led to a failure of the "insertion"
forward port, which did not take that possibility in account (it
assumed -- sensibly I believed -- that an intermediate FP following a
branch insertion would always succeed, sadly the malevolent universe
had other plans).
So only insert the new forward port inside its sequence (if necessary)
if the forward port actually succeeded, otherwise ignore it.
Fixes#551
On #509, the rebasing process was changed to forcefully update the
commit date of the commits, in order to force trigger builds.
However when squashing was re-enabled for #539 for some fool reason it
implemented its own bespoke rebasing (despite that not actually saving
any API call that I can see), meaning it did *not* update the commit
date. As such, an old commit being squashed would not get picked up by
the runbot, which is what happened to odoo/documentation#1226 (which
ultimately had to be hand-rebased after some confusion as to why it
did not work).
Update `_stage_squash` to go through `rebase` the normal way, also
update `rebase` to pop the commit date entirely instead of setting it
manually, and update the squashing test to check that the commit date
gets properly updated.
Fixes#579, closes#582
Multiple fixes to various issues of the freeze wizard.
Some of the less fix-oriented sub-tasks were moved to #586 for discussion instead.
Closes#559, #587
When a build is garbage collected and the local folders are cleaned, the
log files are kept to allow build errors investigations.
With this commit, a full local cleanup will be done 365 days after the
garbage collect. This means that the build dir will be completely
removed. The default number of days can be tweaked with the
`runbot.full_gc_days` ir.config_parameter.
Also, the _local_cleanup method can be called with a `full` boolean
parameter to force a full cleanup. e.g.: when called in a config step.
While at it, the res_config_settings view is a bit reorganized.
Currently limited to release/freeze PRs: it can be difficult to be
sure the right PR was selected then, and a mistake there seems more
impactful than in the PRs being waited for?
Note: adds a test to make sure I don't break the check that all
release PRs must have the same label (be linked). This was
already safe, and in a way this PR adds convenience but not
really safety, but better sure than sorry.
The freeze wizard has support for merging freeze / release PRs on each
of the newly created branches. But since this would be done by, well,
merging, those PRs would get forward-ported to master, and would have
to be closed there.
This creates additional work for the freeze master, and noise /
parasitic PRs.
Obviously it's possible for the freeze master to set some nonsense `up
to` (nonsense because the "real" limit doesn't exist yet at that
point), but really it never makes any sense to forward port release
PRs, so the wizard should do it.
- add flag to not select repos for freezing
- allow removing more repositories from the wizard
- when performing the freeze, only create branches for the selected
repos
The freeze wizard was implemented using a single action to open and
validate the dialog.
This was a mistake, as it means if there are no errors left (e.g. all
the PRs being waited for are now validated) trying to view the freeze
wizard will immediately validate it and commit the freeze, which is
unexpected, surprising, and unsafe e.g.
- open wizard
- add freeze prs
- add a required pr or two
- close and go do something else
- be told that more PRs need to be waited for
- reopen wizard
- oops freeze is done
So split the "open action" part of `action_freeze` into opening the
action and performing the freeze. The "freeze" / "view freeze" button
on the project only activates the latter, and the actual freeze
operation is only triggered from the wizard's "Freeze" button.
Part of #559.
When a git archive fails, the partially exported source tree is left in
place. If another builds tries to use the same commit, the tree is not
exported anymore as the directory exists. This leads to non
deterministic behaviors.
Right now single version repo like upgrade are managed using
a regex to limit name prefix, this avoid grouping branches when
mergebot wont be able to merge them together but the ci can be painfull
since the branch needs to be renamed (closing existing pr) or a manual
operation to move the branch into a new bundle must be performed.
This commit proposes to replace the forbidden_regex mechanism with
an explicit single_version mechanism.
In this case the reference name will be automatically prefixes with
the version. The prefix contains `---` to indicate that some
magic was applied.
